Abstract:A cascading failure of landslide dams caused by strong earthquakes or torrential rains in mountainous river valleys can pose great threats to people's lives, properties, and infrastructures. In this study, based on the three-dimensional Reynolds-averaged Navier-Stokes equations (RANS), the renormalization group (RNG) k-ε turbulence model, suspended and bed load transport equations, and the instability discriminant formula of dam breach side slope, and the explicit finite volume method (FVM), a detailed numerical simulation model for calculating the hydro-morphodynamic characteristics of cascading dam breach process has been developed. The developed numerical model can simulate the breach hydrograph and the dam breach morphology evolution during the cascading failure process of landslide dams. A model test of the breaches of two cascading landslide dams has been used as the validation case. The comparison of the calculated and measured results indicates that the breach hydrograph and the breach morphology evolution process of the upstream and downstream dams are generally consistent with each other, and the relative errors of the key breaching parameters, i.e., the peak breach flow and the time to peak of each dam, are less than ±5%. Further, the comparison of the breach hydrographs of the upstream and downstream dams shows that there is an amplification effect of the breach flood on the cascading landslide dam failures. Three key parameters, i.e., the distance between the upstream and the downstream dams, the river channel slope, and the downstream dam height, have been used to study the flood amplification effect. The parameter sensitivity analyses show that the peak breach flow at the downstream dam decreases with increasing distance between the upstream and the downstream dams, and the downstream dam height. Further, the peak breach flow at the downstream dam first increases and then decreases with steepening of the river channel slope. When the flood caused by the upstream dam failure flows to the downstream dam, it can produce a surge wave that overtops and erodes the dam crest, resulting in a lowering of the dam crest elevation. This has an impact on the failure occurrence time and the peak breach flow of the downstream dam. The influence of the surge wave on the downstream dam failure process is related to the volume of water that overtops the dam crest and the erosion characteristics of dam material. Moreover, the cascading failure case of the Xiaogangjian and Lower Xiaogangjian landslide dams has also been used as the representative case for validating the model. In comparisons of the calculated and measured breach hydrographs and final breach morphologies, the relative errors of the key dam breaching parameters are all within ±10%, which verify the rationality of the model is applicable to real-world cases. Overall, the numerical model developed in this study can provide important technical support for the risk assessment and emergency treatment of failures of cascading landslide dams.

Energy Dissipation Effect of Different Structures on Debris Flow

Numerical Simulation of Two-Dimensional Dam Failure and Free-Side Deformation Flow Studies

RELATIONSHIP BETWEEN MOVEMENT CHARACTERISTICS OF NON-HOMOGENEOUS DEBRIS FLOW AND PEAK FLOW

Energy Dissipative Braking Structures for Avalanches Evaluated by a Full Avalanche Dynamic Model

Energy Dissipation of Debris Flow Through Pile Group Obstructions

Numerical investigation of debris flow–structure interactions in the Yarlung Zangbo River valley, north Himalaya, with a novel integrated approach considering structural damage

Predicting the Occurrence of Channelized Debris Flow by an Integrated Cascading Model: A Case Study of a Small Debris Flow-Prone Catchment in Zhejiang Province, China

Debris Flow Runout Behaviors Considering the Influences of Densely Populated Buildings

Multiscale Anaylsys of Debris Flows

Hybrid Simulation of the Initiation and Runout Characteristics of A Catastrophic Debris Flow

Dynamics of granular debris flows against slit dams based on the CFD–DEM method: effect of grain size distribution and ambient environments

Particle size spatial distribution in landslide dams

3D numerical simulation of debris-flow motion using SPH method incorporating non-Newtonian fluid behavior

3D-SPH-DEM coupling simulation for the large deformation failure process of check dams under debris flow impact incorporating the nonlinear collision-constraint bond model

A simple method to evaluate the performance of an intercept dam for debris-flow mitigation

SPH model for fluid–structure interaction and its application to debris flow impact estimation

Numerical Investigation of Deposition Mechanism of Submarine Debris Flow

Mechanism and flow process of debris avalanche in mining waste dump based on improved SPH simulation

A Preliminary Study of the Failure Mechanisms of Cascading Landslide Dams

Numerical investigation of hydro-morphodynamic characteristics of a cascading failure of landslide dams

Quantitative analysis of artificial dam failure effects on debris flows - A case study of the Zhouqu '8.8' debris flow in northwestern China