Abstract:Teleoperated manipulation under the human intelligence is an effective solution to confront complicated tasks in unknown environments. However, the uncertain contact in environments is the main challenge to achieve good teleoperation, and some inevitable issues such as nonlinearities, various uncertainties, constraints, and communication delays in local and remote robots should also be taken into account. In this article, a unified contact model is proposed to be the targeted environment interaction for remote robot, which can cover various conditions such as free motion and rigid contact by setting different model parameters. Subsequently, a hybrid motion/force controller is developed to cope with nonlinearities and various uncertainties by adaptive robust technique, thus guaranteeing system stability and good transient convergence to the unified contact model. Particularly, to handle misteleoperation or sudden change of conditions described in unified contact model, a model predictive control-based contact optimization method is developed to be the outer loop of hybrid motion/force controller, which plans the desired motion and force trajectories that meet the state and targeted interaction constraints. By the estimation and transmission of environment parameter, the environment dynamics is reconstructed in the local side, which provides the effective force feedback of remote contact environment for human operator. Since the signal transmitted is replaced by the estimated environment parameter, the power-cycle in communication channel is eliminated. This design can avoid the passivity stability problem caused by communication delays, so the stability and good transparency under delays can be guaranteed by the separate design of local and remote controllers. The comparative experiments are implemented and verify the effectiveness of proposed framework for teleoperated manipulation.

Distributed Collaboration in Multimanipulator Systems with Switching and Weight-Unbalanced Topologies

On the Virtual Joints for Kinematic Control of Redundant Manipulators with Multiple Constraints

A Unified Approach for Second-Order Control of the Manipulator With Joint Physical Constraints

A Unified Weighted Least Norm Method For Redundant Manipulator Control

Clamping Weighted Least-Norm Method for the Manipulator Kinematic Control with Constraints.

Distributed end-effector formation control for mixed fully- and under-actuated manipulators with flexible joints

Distributed Stabilization of Heterogeneous MASs in Uncertain Strong-Weak Competition Networks

Unified Contact Model and Hybrid Motion/force Control for Teleoperated Manipulation in Unknown Environments

Distributed Optimization for the Multi-Robot System Using a Neurodynamic Approach.

Collaborative Control for Multimanipulator Systems With Fuzzy Neural Networks

Distributed formation control for manipulator end-effectors

Distributed Motion Control of Multiple Mobile Manipulators for Reducing Interaction Wrench in Object Manipulation

Distributed robust fault‐tolerant consensus tracking control for multi‐agent systems with exogenous disturbances under switching topologies

Homogeneous weighted motion planning for cooperated manipulator systems under position-torque constrained processing Environment

Distributed Motion Control of Multiple Mobile Manipulator System with Disturbance and Communication Delay

Distributed Cooperative Control of Redundant Mobile Manipulators With Safety Constraints

A Distributed Unscented Predictive Cooperation Approach for Networked Mobile Manipulators

Decentralized Ability-Aware Adaptive Control for Multi-robot Collaborative Manipulation

Distributed Six Degree-of-freedom Spacecraft Formation Control with Possible Switching Topology

Composite Cooperative Synchronization and Decentralized Learning of Multi-Robot Manipulators with Heterogeneous Nonlinear Uncertain Dynamics.

Multiple Symmetric Task Control for Networked Robot Systems over Switching Network Topology