Enhanced Adiabatic Film Cooling Effectiveness by Varying Compound Angle

Yeongmin Pyo,Mohsen Broumand,Juchan Son,Patrick Richer,Bertrand Jodoin,Zekai Hong

DOI: https://doi.org/10.1115/gt2024-122413

2024-01-01

Abstract:Effusion cooling is the state-of-the-art cooling technology for gas turbines. However, the compound angle of effusion cooling holes is commonly set as a fixed value in prior studies. In particular, the compound angle is mostly set to zero in practice by assuming that highly directional miniature effusion cooling jets are aligned with the main flow. A recent study from our group has examined the directional effects of effusion cooling on adiabatic film cooling effectiveness (AFE) subjecting to a swirling main flow. It was found that a large compound angle initially facilitates a quick build-up of cooling film and the optimal compound angle reduced to smaller values downstream where the cooling film is further developed. The current study exploits the recent findings in the directional effects of effusion cooling by proposing novel effusion cooling designs with varying compound angles of cooling holes which are optimized for improving AFE along the main flow direction. In the present study, AFE was experimentally determined using Pressure Sensitive Paint (PSP) through invoking the heat/mass transfer analogy. A new effusion cooling design was evaluated by setting the compound angles of effusion cooling holes to three discrete values of 90, 60, and 30 degrees at three successive regions along the direction of the main flow. 2D AFE maps resulting from the proposed design were compared with those of conventional effusion cooling designs with fixed compound angles under identical conditions. It was found that the new effusion cooling design featuring varying compound angles produces a more uniform cooling film coverage and a small enhancement to AFE comparing to the conventional effusion cooling designs.