Abstract:Sampling and analysis of trace elements in open seawater and in sediment pore water in the deep sea is challenging due to small sample volumes and matrix effects. Here we evaluate an alternative method using the technique of diffusive gradients in thin films (DGT passive samplers), focussing on rare earth elements and yttrium (REY). DGT measures the labile fraction of metals in situ by fixing them on a Chelex resin after diffusion through a gel layer, providing a diffusive flux and averaged in situ concentrations of elements during the time of deployment. As the accumulated element concentrations increase with exposure time to solution, long-term deployment times overcome low trace metal concentrations in seawater and pore water. So far, no deep-sea applications of passive samplers are yet reported.Sampling was performed in bottom seawater and surface sediments in the German licence area for manganese nodule exploration in the Clarion Clipperton Zone (CCZ, research cruise SO268 in April/May 2019), deployment times ranged from 12 hours in sediments to 4 weeks in open seawater.Seawater DGT&#8217;s were deployed 0.5 m to 8 m above the seafloor. PAAS-normalized REY show the typical seawater pattern, with increase from LREE to HREE, a strong negative Ce anomaly, a kink from Gd to Tb, and a pronounced positive Y/Ho anomaly. The pattern and calculated concentrations agree very well with reported dissolved REY (<0.2 &#181;m) for Pacific deep water (Alibo and Nozaki, 1999). Sediment DGT sticks were deployed in cores taken with a multicorer and cover the first 15 cm of the sediment. They provide in situ high-resolution profiles of trace metal fluxes and were analysed in 0.5 cm to 2 cm segments. We observe smooth PAAS-normalized patterns with negative Ce anomaly, an increase from LREE to MREE, and a slight decrease from Tb to Lu, sometimes accompanied by a small positive Y/Ho anomaly. The calculated concentrations generally increase with depth. Paul et al (2019) previously described very similar distribution patterns for CCZ sediment pore water and suggested Mn and Fe phases as the REY source. The pore water REY patterns clearly differ from bottom seawater already in the first centimetres of surface sediment&#8211; this sharp shift demonstrates that the dissolved pore water REY pool in the sediment surface is controlled by fluid-mineral equilibria.The DGT passive sampling method may provide an additional tool to investigate biogeochemical processes at the deep-sea sediment-water interface and in the open ocean, and to monitor effects of anthropogenic disturbances at the seafloor on benthic trace element fluxes. We will discuss uncertainties of concentration calculation resulting from diffusion coefficients and from non-steady state conditions in pore water, and the comparability of DGT-derived distribution pattern and concentrations with results from physically filtered water. The DGT labile fraction is thought to represent the bioavailable fraction of trace elements and may also include colloids and nanoparticles (NPCs).&#160;Alibo and Nozaki, 1999: Geochimica et Cosmochimica Acta 63, pp. 363-372.Paul et al, 2019: Geochimica et Cosmochimica Acta 251, pp. 56-72.

Preconcentration Strategies for Trace Metals Including REEs in Seawater and Porewater by Employing Commercial Chelating Resin – A Review

Determination of Rare Earth Elements in Pore Water Samples of Marine Sediments Using an Offline Preconcentration Method

Do the medical treatment reduces the rate of surgical treatment in suspected cases of chronic prostatitis before prostatectomy

REY distribution and concentration in bottom seawater and oxic pore water in the CCZ, NE Pacific: pilot study on the application of a DGT passive sampling method in deep sea environments

In-situ auto-analysis technique of trace heavy metal in seawater

Multielemental Determination of Rare Earth Elements in Seawater by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) After Matrix Separation and Pre-concentration With Crab Shell Particles

Onsite chelate resin solid-phase extraction of rare earth elements in natural water samples: its implication for studying past redox changes by inorganic geochemistry

Simultaneous Enrichment of Inorganic and Organic Species of Lead and Mercury in Pg L−1 Levels by Solid Phase Extraction Online Combined with High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry

Multielemental Isotopic Analysis for Trace Metals in Geochemical Samples, Part 1: Dissolved Iron, Nickel, Copper, Zinc, Cadmium, and Lead in Seawater

Simultaneous Determination of Cr, As, Se, and Other Trace Metal Elements in Seawater by ICP-MS with Hybrid Simultaneous Preconcentration Combining Iron Hydroxide Coprecipitation and Solid Phase Extraction Using Chelating Resin

Efficient preconcentration of ultra-trace rhenium from geological materials via induced adsorption for accurate isotope analysis

Thiol-functionalized silica microspheres for online preconcentration and determination of mercury species in seawater by high performance liquid chromatography and inductively coupled plasma mass spectrometry

Online anion exchange column preconcentration and high performance liquid chromatographic separation with inductively coupled plasma mass spectrometry detection for mercury speciation analysis.

Preconcentration of Trace Elements from Natural Water with Palladium Precipitation

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Flow Injection On-Line Solid Phase Extraction Coupled with Inductively Coupled Plasma Mass Spectrometry for Determination of (ultra)trace Rare Earth Elements in Environmental Materials Using Maleic Acid Grafted Polytetrafluoroethylene Fibers As Sorbent

Trace-Metal-Clean Sampling System: Application to Ice-Breaking Research Vessel Araon

Graphene oxide as an efficient adsorbent of solid-phase extraction for online preconcentration of inorganic and organic mercurials in freshwater followed by HPLC-ICP-MS determination

Trace metals in coastal marine sediments: Natural and anthropogenic sources, correlation matrices, and proxy potentials

A bulk extraction method to determine the stable isotope ratios of iron, nickel, copper, zinc, and cadmium in seawater using multi-collector inductively coupled plasma mass spectrometry

New methodological approach for deep penetrating geochemistry and environmental studies part 1: on-site soil extraction of trace and rare earth elements