Abstract:In the absence of flux measurements, techniques of field orientations depend on motor parameters, particularly on rotor resistances. During operation in flux-oriented mode, online continuous estimation of harmonic and fundamental rotor resistances is important for multiphase IM. To limit the core saturation and to achieve the synchronous and aligned air-gap flux density distribution, the harmonic plane is based on magnetizing flux-oriented control (MFOC) whereas the fundamental plane is taken as rotor flux-oriented control (RFOC). Mismatch harmonic and fundamental resistances trigger deviations in the rotor and magnetizing flux and also cause misalignment in the resultant induced electromotive force (EMF) waveform which could, in turn, be the reason for over-excitation and under-excitation. This article formulates the simultaneous online identification of rotor resistances for particularly MFOC harmonic plane while the fundamental plane is RFOC based on the dot product of rotor flux and stator current for making a model reference adaptive system (MRAS). Mismatched stator resistance and dead time of inverter have a negligible effect on the reference model during steady state. Convergence and steady-state performance can be acquired for a variation of load conditions particularly at heavy loading. The validation of the proposed approach is verified through simulation and experiment results by incorporating a multiphase platform consisting of a seven-phase induction machine.

PMSM Inductance Surface Adaptive Identification Decoupled from Rotor Position Error and Speed Coupling Effect

An Enhanced Sensorless Control Scheme for PMSM Drives Considering Self-inductance Asymmetry

A Novel Full Electrical Parameters Estimation Method of Permanent Magnet Linear Synchronous Machines Considering Parameter Asymmetry

Adaptive Sensorless Control of High Speed Surface-Mounted PMSM Drives with Inductance Estimator Based on Current Error

Multiplane Rotor Resistance Online Estimation Strategy for Multiphase Induction Machine under Nonsinusoidal Power Supply

Online Identification of Inductance and Flux Linkage for SPMSMs Decoupled from Resistance Voltage Drop and VSI Nonlinearity

Online Inductance Identification for PMSM Sensorless Control Immune to Position Error

An Improved Method to Estimate Initial Rotor Position for Surface-Mounted Permanent Magnet Synchronous Motors

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

Online Inductance Identification of PMSM Based on High Frequency Signal Injection into Virtual Axis

Improved Sensorless Control for Permanent-Magnet Synchronous Motor with Self-Inductance Asymmetry

Harmonic and Fundamental Rotor Resistance Estimation Scheme for Multiphase Induction Motor Based on Nonsinusoidal Supply Control

First-Order Model Based Inductance Identification With Least Square Method for High-Speed Sensorless Control of Permanent Magnet Synchronous Machines

Online Inductance Identification of Permanent Magnet Synchronous Motors Independent of Rotor Position Information

Current Ripple Sampling based Angle Error Compensation for High-speed Permanent Magnet Synchronous Motor Sensorless Control Considering Inductance Saturation

Hybrid Position Observer of IPMSM with Online Rotor Flux Identification

Position correction-based sensorless control with online inductance identification for SPMSMs

Effect of inductance parameters on the rotor position estimation for IPMSM

On-Line Identification of Permanent Magnet Flux in IPMSM Drive

Sensorless Control of Surfaced-Mounted Permanent Magnet Synchronous Motor in a Wide-Speed Range

A Position Sensorless Drive Method with Low Computational Cost and Inductance Identification for Surface-Mounted PMSM with Hybrid Converter