Abstract:Adoption of centralized underground refrigeration cooling system in high-temperature mine is affected by the range of mining.The complex chilled water transmission pipeline network leads to inadequate supply of terminal cooling capacity,which significantly af-fects the cooling effectiveness.In order to improve the utilization of cooling capacity in mine cooling system,taken the underground refri-geration cooling pipe network of Zhaolou Coal Mine as an example.The topological model of cooling pipe network was established based on the principle of graph theory.The hydraulic basic equation was used to calculate the flow,nodal resistance and hydraulic losses of the pipe section to obtain the hydraulic characteristics of cooling pipe network.The cooling loss of chilled water transportation was determ-ined by calculating the temperature rise of pipe network nodes.The cooling pipe network was optimized by combining the hydraulic and thermal characteristics of pipe network.The results shown that,the minimum chilled water flow was 0.001 m3/s in the working face at the end of underground cooling pipe network in Zhaolou Coal Mine.The locations with significant hydraulic losses in the pipe network were A set of Track Downhill,7302 Transport Roadway and Central Auxiliary Transport Roadway.The system respectively supplied cooling to four working faces in the Fifth and Seventh mining areas.The total cooling loss was 1.219×106 J/s,of which the cooling system in Sev-enth mining area accounted for 88.15%,the friction and heat transfer losses of pipe network is 5.39×105 J/s and 6.805×105 J/s,respect-ively,and the maximum temperature of chilled water at the end was 13.9℃.The optimization method of pipeline-pump-valve inter-condi-tioning was proposed,the dynamic balance valve was used to maintain the chilled water flow in the range of 0.022-0.04 m3/s in the South 1#Auxiliary Transportation Roadway and the Second Set Auxiliary Roadway,to achieve the flow stability of the end air cooler.The stat-ic balance valve was used to adjust the branch resistance of the pipe network,and the chilled water flow was increased to 0.005 m3/s at the working face.The pipe diameter of the South No.1 Auxiliary Transportation Roadway,the South No.2 Auxiliary Transportation Roadway and the Second Set Auxiliary Roadway was increased to 0.325 m,and total hydraulic loss of the pipe network was reduced from 30.93 m to 20.44 m,which was a reduction of 35%.The centrifugal pump head was adjusted to 183-195 m with a flow rate of 0.085-0.112 m3/s,which ensured efficient operation of the centrifugal pump.

Comparison of Artificial Refrigeration Cooling Schemes for High Temperature Tunneling Roadway in Deep Mines--The Case of Yunnan Dahongshan Copper Mine

Research on the Mobile Refrigeration System at a High Temperature Working Face of an Underground Mine

Efficiency Improvement and Application of the Groundwater Heat Pump Cooling System in Linglong Gold Mine

A thermal environment prediction method for a mine ventilation roadway based on a numerical method: A case study

Study of energy-efficient heat resistance and cooling technology for high temperature working face with multiple heat sources in deep mine

Multistage Cooling System for Temperature Reduction of the Working Face in Deep Coal Mines: A Technical-Economic Evaluation

Simulated and experimental study on effect of thermal insulation layer on temperature field and heat dissipation of roadway surrounding rock

Experimental and numerical study on heat emission characteristics of ventilated air annular in tunneling roadway

Study on heat transfer characteristic parameters and cooling effect of cold wall cooling system in coal mines

Characteristic studies of heat sources and performance analysis of free-cooling assisted air conditioning and ventilation systems for working faces of mineral mines

Numerical simulation of mine heat hazard governance and geothermal resource exploitation using extraction-ventilation collaborative method

Research on calculation and optimization method of refrigeration and cooling pipe network in high temperature mine

Numerical investigations of unsteady heat transfer in ultra-long roadways with periodic fluctuation of airflow temperature

Numerical simulation research on thermal insulation performance of composite heat-insulation zone structure in hydrothermal high-temperature mine

Development and application of thermal insulation material for underground roadway with high ground temperature

Operation Optimization of Thermal Management System of Deep Metal Mine Based on Heat Current Method and Prediction Model

Field measurement and assessment on airflow thermodynamic parameters in hot and humid underground tunnelling: A case study

Experimental Investigation of Ground and Air Temperature Fields of a Cold-Region Road Tunnel in NW China

Numerical Simulation of Fluid–Solid Coupling Heat Transfer in Excavation Roadway

Experimental analysis on dynamic performance of refrigeration systems in a deep gold mine

Technologies for Heat Hazard Governance and Thermal Energy Recovery in Deep Mines