Abstract:The working portfolio to explore the effects of isothermal annealing on mechanical properties of HFDM‐prepared composites. Fused deposition modeling (FDM) based large‐area additive manufacturing has advanced significantly, particularly for producing large parts with high‐performance short fibrous composites. To improve the mechanical performance of these manufactured parts, isothermal annealing is often employed as a post‐treatment for FDM‐produced components. Hence, this study examines the impact of isothermal annealing on the mechanical properties of short carbon fiber‐filled Polyamide 12 (PA12‐CF) and polyethylene terephthalate glycol (PETG‐CF). Samples are prepared using a customized high‐extrusion‐rate FDM (HFDM) system with varying key printing parameters (layer height and extrusion width). Three‐point bending tests are employed to assess the bending strength, modulus, and fracture deflection of the samples. Results show that annealing treatment significantly enhances the bending performance of PA12‐CF, with strength and modulus increasing by 27.8% and 31.2%, respectively. In contrast, PETG‐CF exhibits relatively minor improvements in bending strength (8.1%) and modulus (2.7%). Optical microscopy reveals that different printing parameters notably influence the alignment of short carbon fibers, affecting the mechanical properties, while the annealing treatment does not alter these parameter‐dependent trends. Finite element simulations further demonstrate that the presence of carbon fibers contributes to a progressive enhancement of the polymer matrix, which impacts mechanical improvement during annealing. Highlights High‐extrusion‐rate FDM is used to prepare PA12 and PETG composite samples. Annealing improves properties more in semi‐crystalline PA12‐CF samples. Meso‐structural analysis reveals that printing parameters play a crucial role. Short‐carbon‐fiber boosts strengths of the polymer matrix during annealing.

Effect of Annealing Treatment on Impact Toughness and Crystallization Behaviors of Polypropylene/ethylene Vinyl Acetate Copolymer/layered Double Hydroxide Composites

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Synergistic Improvement of Toughness of Isotactic Polypropylene: the Introduction of High Density Polyethylene and Annealing Treatment

Probing Into the Annealing Effects on Microstructure and Mechanical Properties of Impact Polypropylene Copolymer With Nodular Crystalline Morphology

Effect of Annealing Rate on Low-Temperature Impact Strength and Space Charge Characteristics of Isotactic Polypropylene

Influence of molten-state annealing on the phase structure and crystallization behaviour of high impact polypropylene copolymer

Destruction Mechanism of Core–shell Particles in Impact Polypropylene Copolymer During Short Molten-State Annealing

Annealing of melt-crystallized polyethylene and its influence on microstructure and mechanical properties: A comparative study on branched and linear polyethylenes

Phase morphology evolution upon melt annealing treatment and corresponding mechanical performance of impact-resistant polypropylene copolymer

Annealing Effect on Pla/Eva Blends Performance

Investigations in annealing effects on structure and properties of β-isotactic polypropylene with X-ray synchrotron experiments

Effect of Thermal Annealing on Conformation of MEH-PPV Chains in Polymer Matrix: Coexistence of H- and J-Aggregates

Polymorphic Crystal Transition and Lamellae Structural Evolution of Poly(p-dioxanone) Induced by Annealing and Stretching.

The Effect of Thermal History on Crystalline Structure and Mechanical Properties of Β-Nucleated Isotactic Polypropylene

Crystallization behaviours regulations and thermostability enhancement strategy of polypropylene composites modified by dispersed rice husk charcoal

Microstructure, morphology, crystallization and rheological behavior of impact polypropylene copolymer

Manipulating Crystallization for Simultaneous Improvement of Impact Strength and Heat Resistance of Plasticized Poly(l-lactic acid) and Poly(butylene succinate) Blends

Combined effects of matrix molecular weight and crystallinity on the impact toughness of PP/EPR blends: The role of chain entanglement

Influences of isothermal annealing post‐treatment on mechanical performances in fused deposition modeling manufactured short carbon fibrous PETG and PA composites

Toughening mechanism in impact polypropylene copolymer containing a beta-nucleating agent