Abstract:Abstract Accurate EUR estimation is a critical component of the oil and gas asset evaluation process and has become increasingly important in de-risking investments in shale plays. Hybridized decline curve analysis has emerged as an industry-wide best practice for this process. This method of interpretation is dependent on the accuracy of the estimated terminal decline rate or switch point. Accurately predicting the terminal decline rate for wells with insufficient production history, has proven difficult. This issue is further aggravated in emerging basins and regions of development, as well as complications associated with parent-child relationships in developed acreages. The present paper tackles these challenges by using a statistical approach to predict the switch point and onset of terminal decline rates in unconventional shale plays. Typical production profiles in unconventional shales are marked by high initial declines and long transient flow regimes, followed by a transition to boundary dominated flow as the pressure transient reaches the boundaries of the effected reservoir. The decline rate at this switch point, as well as the duration to get to it can vary significantly and is dependent on a wide range of variables. The present paper tackles this multivariable problem by using an ACE (alternating conditional expectation) non-linear regression model to predict the switch point. Variables used to predict this change in flow regime include: Gamma Ray, Resistivity (Deep), RHOB, NPHI, formation thickness, WOR, GOR, completion design, proppant amount per foot, perforated interval, and production performance amongst others. In order to account for the impact on production, behavior from infill development and parent-child relationship discrepancies, date- dependent 3D well spacing was calculated and incorporated as a variable in the statistical model. This process was tested and applied to a large dataset of wells in the middle Bakken formation in the Williston Basin. The transformations derived from the ACE models increased clarity on the most significant factors driving Terminal Decline. For this study, the resulting transformations from the geological attributes proved most intriguing and provided insight to the physical limits of each. A few important parameters include formation thickness, neutron porosity (NPHI), and reservoir thickness. The "sweet spot" for (NPHI) was determined to be ∼6-8% and lies flat with NPHI values greater than ∼8.5%. Physically, this would correlate with decreased hydrocarbon potential due to the decrease of pore volume below ∼8.5%. Interestingly, Terminal Decline increased as reservoir thickness increased which is counter intuitive to traditional rock properties. Finally, wellbores with a lateral length of ∼10,500' or greater experienced the largest decrease in terminal decline rate. One potential explanation is the variability of the geology the wellbore encounters. The ACE models derived during this study were used to determine the most significant factors impacting terminal decline and will be discussed further within the full study. The present paper provides a novel approach to estimate the transition point to de-risk EUR estimates across shale plays. This analysis adds to the existing body of literature by using data analytics and machine learning to tackle this problem from a truly multivariable standpoint. The insights developed are widely applicable and may provide best practices for a varied range of challenges in EUR prediction.

Production decline curve analysis of shale oil wells: A case study of Bakken, Eagle Ford and Permian

Multifactor Analytical Model for Natural Decline Rate in Waterflood Field

Empirical methods of decline-curve analysis for shale gas reservoirs: Review, evaluation, and application

Process of EUR prediction for shale gas wells based on production decline models—a case study on the Changning block

A Simulation-Based Method to Determine the Coefficient of Hyperbolic Decline Curve for Tight Oil Production

The Shale Technical Revolution – Cheer or Fear? Impact Analysis on Efficiency in the Global Oilfield Service Market

Production Prediction Model of Tight Gas Well Based on Neural Network Driven by Decline Curve and Data

Differentiation and Prediction of Shale Gas Production in Horizontal Wells: A Case Study of the Weiyuan Shale Gas Field, China

Modeling Terminal Decline Rate in Flow Regime Transition using Alternating Conditional Expectation Non-Linear Regression Methods

Production Decline Analysis Method for Fractured Gas Well in Sulige Tight Gas Reservoir Based on Arps Decline Model

Analysis and Comparison of Decline Models: A Field Case Study for the Intercampo Oil Field, Venezuela

Decline Analysis for Horizontal Wells of Intercampo Field, Venezuela

Shale gas production evaluation framework based on data-driven models

Optimization of Financial Indicators in Shale-Gas Wells Combining Numerical Decline Curve Analysis and Economic Data Analysis

Review of the productivity evaluation methods for shale gas wells

A Semianalytical Production Prediction Model and Dynamics Performance Analysis for Shale Gas Wells

Numerical prediction of the decline of the shale gas production rate with considering the geomechanical effects based on the two-part Hooke’s model

A Simple Normalized Analytical Model for Oil Production of SAGD Process and Its Applications in Athabasca Oil Sands

A New Method for Production Data Analysis in Shale Gas Reservoirs

Novel methodology to couple decline curve analysis with CFD reservoir simulations for complex shale gas reservoirs

Fractured Horizontal Well Productivity Prediction in Tight Oil Reservoirs