Abstract:The utilization of industrial solid waste with potential cementitious activity to prepare low carbon, economic and environmental backfilling cementitious materials is an urgent issue in cemented paste backfill (CPB). In this work, the mechanical grinding activation of modified magnesium slag (MMS), including grinding kinetics, crystallinity, and the influences on backfilling paste characteristics, have been investigated systematically. The indexes of particle size distribution (PSD), fineness, and sieve residue indicate that the grinding efficiency of MMS is high when grinding time ranges [20, 80] min. The particle coarsening appears when the grinding time increases to 120 min from 100 min. A fitted grinding kinetics function of MMS has been established based on the measured PSDs with six grinding time. The XRD shows that the diffraction peak intensities of CaSO 4 and SiO 2 phases decreases with the increasing of grinding time, indicating the increasing of lattice defects and amorphization degree. Both of grinding dispersion refinement and amorphization increase of MMS contribute to the activation of cementitious reactivity. Grinding time has a great influence on the properties of modified magnesium slag-based (MMS-based) backfilling pastes. The fresh backfilling pastes conformed to both of the H-B model and revised Bingham model well. The critical shear rate, critical apparent viscosity, and extended degree increase with the increasing of grinding time, indicating that the fluidity decreases. The TG-DTG, SEM tests show that hydration rate of the MMS-based backfilling pastes is slow and there are many interconnected micropores when the grinding time is below 60 min. Besides, the uniaxial compressive strengths (UCS) of MMS-based backfilling mortar samples also show a similar pattern. All tests showed that grinding for 60 min could stimulate most of the potential cementitious reactivity of MMS. Meanwhile, the corresponding backfilling paste behaves good working condition. Taken together, 60 min is suggested as the optimal grinding time for MMS in consideration of energy consumed and technical benefits, and the corresponding specific surface area (SSA) and 45 μm sieve residue (SR) are 503 m 2 /kg and 3.83%, respectively.

Ground Granulated Blast Furnace Slag-modified Magnesium Phosphate Cement Used As Grouting Material: Workability, Mechanical Property and Corrosion Resistance Optimization

Characterization of Magnesium Potassium Phosphate Cement-Based Grouting Material Blended with High Volume Industrial Wastes

Hydration and Properties of Magnesium Potassium Phosphate Cement Modified by Granulated Blast-Furnace Slag: Influence of Fineness

Improvement of two-component grouts by the use of ground granulated blast furnace slag

Evaluation of compressive strength and chloride permeability of cement-based materials with high-volume compound mineral admixtures

Strength and hydration properties of reactive MgO-activated ground granulated blastfurnace slag paste

Investigation on rapid solidification of waste dredged sludge with magnesium phosphate cement modified by GGBFS

Improvement of physico-mechanical and microstructural properties of magnesium phosphate cement composites comprising with Phosphogypsum

Mechanical and durability analysis of geopolymer concrete incorporating bauxite residue, phosphogypsum, and ground granulated blast slag

Study on the Chloride–Sulfate Resistance of a Metakaolin-Based Geopolymer Mortar

Effects of Bauxite Tailings and Sodium Silicate on Mechanical Properties and Hydration Mechanism of Magnesium Phosphate Cement

Hydration process and fluoride solidification mechanism of multi-source solid waste-based phosphogypsum cemented paste backfill under CaO modification

Preparation and Characterization of Low-Carbon Cementitious Materials Based on Soda-Residue-Activated Ground Granulated Blast-Furnace Slag: A Case Study on Cemented Paste Backfills

Mechanical grinding activation of modified magnesium slag and its use as backfilling cementitious material

A Novel Gypsum-Based Self-Leveling Mortar Produced by Phosphorus Building Gypsum

Preparation and microstructure analysis of alkali-activated ground granulated blast furnace slag-steel slag grouting materials

Effect of MgO and superfine slag modification on the carbonation resistance of phosphogypsum-based cementitious materials: Based on hydration enhancement and phase evolution regulation

Mechanical properties and chemical microscopic characteristics of all-solid-waste composite cementitious materials prepared from phosphogypsum and granulated blast furnace slag

Influence of partial cement substitution by ground blast furnace slag on the mechanical properties of phosphogypsum cemented backfill

The effects of admixtures on the durability properties of phosphogypsum-based cementitious materials

Utilization of ground granulated blast-furnace slag and electrolytic manganese residue as a low-carbon cementitious material