Abstract:Fused filament fabrication (FFF) is a low-cost 3D printing technology that allows the production of components and structures with complex geometries, which cannot be achieved by traditional manufacturing processes. Nonetheless, this additive technique is not extensively used in high-value industrial sectors, mainly due to parts’ anisotropy related to deposition strategy and residual stresses caused by successive heating cycles. These features have a great influence on the mechanical performance of 3D-printed parts, in particular, thermoplastics with nonlinear behaviour (such as PLA or PA). Thus, engineering approaches to predict these elasto-plastic responses are demanded. In this work, the tensile and compression behaviours of FFF thermoplastics are investigated using a yield criterion that accounts, simultaneously, the presence of tensile and compressive loads applied on the material (a modified Hill yield criterion). The developed elasto-plastic algorithm, which uses the incremental-iterative Newton–Raphson method, is implemented within the formulation of a meshless method. Despite the use of the finite element method (FEM) for engineering applications have become widespread, new accurate and efficient discrete advanced numerical techniques—such as meshless methods (Belinha in Meshless methods in biomechanics: bone tissue remodelling analysis. Springer International Publishing, Porto, 2013 [1])—can handle the same kind of problems as the FEM and being, in some cases, even more efficient. To discretize the problem domain, meshless methods only require an unstructured nodal distribution. The numerical integration of the Galerkin weak form is performed using a background integration mesh, the nodal connectivity is enforced using the influence-domain concept and then the interpolation shape functions are obtained. In order to validate the numerical proposed algorithm, standardized tensile and compressive specimens were printed and tested. Then, using the material properties extracted from the experimental tests, a benchmark example was studied for the sake of model proof.

A Reduced-Order Model of Thermo-Viscoelastic Filaments in a Material Extrusion Process

A Three-Dimensional Thermal Model for Viscoelastic Polymer Melt Packing Process in Injection Molding

Three-dimensional Simulations of Non-Isothermal Transient Flow and Flow-Induced Stresses During the Viscoelastic Fluid Filling Process

Numerical modelling of the viscoelastic polymer melt flow in material extrusion additive manufacturing

A thermo-chemo-mechanical model for material extrusion of frontally polymerizing thermoset polymers

Numerical Simulation of Three‐dimensional Polymer Extrusion Flow with Differential Viscoelastic Model

Numerical Study of Nonisothermal Polymer Extrusion Flow with a Differential Viscoelastic Model

Continuous Modeling and Simulation of Flow-Swell-crystallization Behaviors of Viscoelastic Polymer Melts in the Hollow Profile Extrusion Process

Three dimensional simulation of viscoelastic polymer melts flow in a cast film process

The polymer melt swelling behavior in micro-extrusion process for preparation of continuous carbon fiber reinforced PP prepreg filament

Numerical Implementation of Strain Rate Dependent Thermo Viscoelastic Constitutive Relation to Simulate the Mechanical Behavior of PMMA

Thermo-Fluid Modeling Of The Friction Extrusion Process

A viscoelastic–viscoplastic modeling approach for amorphous polymers in vacuum forming simulation

Multi-scale modeling and simulation of additive manufacturing based on fused deposition technique

Finite-element simulation of polymer flow and extrudate swell through hollow profile extrusion die with the multimode differential viscoelastic model

Development of a Constitutive Model to Predict the Elasto-Plastic Behaviour of 3D-Printed Thermoplastics: A Meshless Formulation

Numerical investigation on the viscoelastic polymer flow in material extrusion additive manufacturing

Numerical Simulation of Viscoelastic Extrudate Swell Through Elliptical Ring Die

The Full Three Dimensional Isothermal Viscoelastic Numerical Simulation on the Extrusion Die Swell of Polymer Profile

Process fundamentals and quality investigation in extrusion 3D printing of shear thinning materials: extrusion process based on Nishihara model

Numerical Simulation of the Extrusion Forming Dynamic Process of Polymer Material