Abstract:Background: The COVID19 epidemic highlighted the importance of air in the transmission of pathogens. Air disinfection is one of the key points to reduce the risk of transmission both in the health sector and in public, civil and industrial environments. All bacteria and viruses tested to date can be inactivated by UV-C rays. Laboratory tested UV-C systems are increasingly popular and proposed as effective technologies for air purification; few studies have evaluated their performance in populated indoor environments. The aim of this investigation was to evaluate the effectiveness of a UV-C disinfection system for air in a real working context. Methods: This experimental study was conducted between December 2020 and February 2021 in an office of the Department of Molecular and Developmental Medicine of the University of Siena, Italy. A pre-final version air purifier (Cleaning Air T12), capable of treating 210 m3/h of air, was first tested for its ability to filter particulates and reduce microbial air contamination in the absence of people. Subsequently, the experiments were conducted in the presence of 3-5 subjects who worked for several hours in an office. During the tests, microbiological samples of air were collected in real time, switching the system on and off periodically. Air samples were collected and incubated on Petri dishes at 36 °C and 22 °C. Statistical analysis was performed with Stata 16 software assuming a significance level of 95%. An interpolating model was identified to describe the dynamics of contamination reduction when the device operates. Results: Preliminary tests showed a significant 62.5% reduction in Colony-Forming Units (CFUs) with 36 °C incubation. Reductions in the particulate component were also observed. In the main test, comparison of CFU data, between the device-on phase (90 min) and the subsequent device-off phase (60 min), showed statistically significant increase (p = 0.001) of environmental contamination passing from a mean of 86.6 (65.8-107.4) to 171.1 (143.9-198.3) CFU/m3, that is a rise of about 100%. The interpolating model exhibited a good fit of CFU reduction trend with the device on. Conclusions: The system, which mainly uses UV-C lamps for disinfection, was able to significantly reduce environmental and human contamination in real time. Experimental tests have shown that as soon as the device is switched off, after at least half an hour of operation, the healthiness of the air decreases drastically within 10 minutes, bringing the airborne microbial contamination (induced by the presence of operators in the environment) to levels even higher than 150% of the last value with the device on. Re-engineering strategies for system improvement were also discussed.

Performance Analysis of a Novel Air Filtration and Sterilization PV-Trombe Wall

The Performance Analysis on a Novel Purification-Cleaning Trombe Wall Based on Solar Thermal Sterilization and Thermal Catalytic Principles

Development and Experimental Validation of a Thermal Inactivation Model for Airborne Bacteria and Its Application in Trombe Wall Systems

Performance Comparison of Multi-Functional Photovoltaic-Trombe Wall with and Without Fins and Their Impacts on the Removal of Indoor Infectious Bioaerosols

A novel catalytic/sterilization PV-Trombe wall system: Analysis on PV electrical and air purification performance in winter

A novel disinfected Trombe wall for space heating and virus inactivation: Concept and performance investigation

Evaluation of an Air Cleaning Device Equipped with Filtration and UV: Comparison of Removal Efficiency on Particulate Matter and Viable Airborne Bacteria in the Inlet and Treated Air

Performance Prediction of a Novel Disinfection-Enhanced Type Trombe Wall with Transverse Fins

Indoor air quality improvement with filtration and UV-C on mitigation of particulate matter and airborne bacteria: Monitoring and modeling.

Optimizing indoor air quality: CFD simulation and novel air cleaning methods for effective aerosol particle inhibition in public spaces

Experimentation and Mathematical Modelling of Process Parameters for Prevention of Infectious Disease Caused by Staphylococcus aureus Bacteria in Indoor Environment

Simulation of thermal sanitization of air with heat recovery as applied to airborne pathogen deactivation

Design and performance evaluation of a photocatalytic reactor for indoor air disinfection

Filtration of Bioaerosols Using Fibrous Air Filter Media

Evaluating viral filtration efficiency in non-centralized air-conditioning systems: a novel approach grounded in medical experimental data

Wind of change: Better air for microbial environmental control

Experimental evaluation of a full-scale in-duct UV germicidal irradiation system for bioaerosols inactivation

A simple and effective aerosol pathogen disinfection test for a flowing air disinfector

Evaluation of zone disinfection by air-passable plasma filter in a novel chamber model

Comprehensive evaluations of the bioaerosol filtration performance of high- and medium-efficiency filters under different influencing factors

Experimental investigation on the purification performance of particle and planktonic bacteria in the human body micro-environment using low-temperature plasma