Abstract:Nanostructures of Ti3C2Tx, one of the members of the MXenes family, have been successfully prepared by chemical etching of Al from Ti3AlC2 (MAX phase) using Hydrofluoric Acid (HF) for various etching durations at room temperature. The phase, morphological, structural, and chemical analysis was performed using XRD, FESEM, TEM, Raman, and X-Ray photoelectron spectroscopy. The surface morphology of as-synthesized Ti3C2Tx (MXene) phase is characterized by stacked of layered sheets like structures. Field electron emission (FEE) was investigated at base pressure of 1 x 10-8 mbar. The pristine Ti3AlC2 (MAX) and Ti3C2Tx (MXene) nanosheets emitters showed values of turn-on field (defined at current density ~ 1 μA/cm2) as 4.18 and 1.67 V/μm, respectively. Furthermore, maximum emission current density of ~ 825 μA/cm2 was extracted from the MXene nanosheets emitter at an applied field of 3.60 V/μm, in contrast to ̴ 71 μA/cm2 drawn at 7.31 V/μm from the pristine MAX emitter. The MXene nanosheets emitter exhibited good emission current stabilities at pre-set values ~ 10 and 100 μA over 3 hours duration. Work function values of the MAX and MXene nanosheets emitters were measured using a retarding field analyzer, and found to be 4.4 and 3.6 eV, respectively. Extensive ab-initio simulations have been performed to provide structural and electronic properties, as well as for estimating the work function of Ti3C2 layered material. The estimated electronic density of states revealed its metallic character. The improved FEE performance exhibited by the 2D layered Ti3C2Tx (MXene) nanosheets emitter is attributed to its unique morphology characterized by high aspect ratio, metallic electronic properties and relatively lower work function.

Imaging and Simulation of Surface Plasmon Polaritons on Layered 2D MXenes

Surface Plasmons in Two-Dimensional MXenes

Plasmon Hybridization Induced by Quasi Bound State in the Continuum of Graphene Metasurfaces Oriented for High-Accuracy Polarization-Insensitive Two-Dimensional Sensors

Ultrahigh nonlinear responses from MXene plasmons in the short‐wave infrared range

Nanoscale Surface and Bulk Electronic Properties of Ti3C2Tx MXene Unraveled by Multimodal X‐Ray Spectromicroscopy

MXene-Antenna Electrode with Collective Multipole Resonances

Ti3C2Tx MXene Thin Films and Intercalated Species Characterized by IR-to-UV Broadband Ellipsometry

Signatures of Band-like Optical and Charge Transport in Ti3C2Tx MXene Flakes

Two-Dimensional MXene Flakes with Large Second Harmonic Generation and Unique Surface Responses

Synthesis, physico-chemical characterization, DFT simulation, and field electron behaviour of 2D layered Ti3C2Tx MXene nanosheets

Ultrabroadband Optical Properties of 2D Titanium Carbide MXene

Studying plasmon dispersion of MXene for enhanced electromagnetic absorption

Fermiology of two-dimensional titanium carbide and nitride MXenes

Dielectric Loaded MXene Plasmon Waveguide for Subwavelength Confinement at 1550 nm

Chiral Plasmonic Response of 2D Ti3C2Tx Flakes: Realization and Applications

Unleashing 2D MXene's Plasmonic Effect for Advanced Photonic Device Applications (Adv. Funct. Mater. 46/2024)

Surface termination dependence of electronic and optical properties in Ti$_2$CO$_2$ MXene monolayers

MXene Supported Surface Plasmon Polaritons for Optical Microfiber Ammonia Sensing

Simultaneous capturing phonon and electron dynamics in MXenes

Bubble Printing of Ti3C2TX MXene for Patterning Conductive and Plasmonic Nanostructures

Dynamics of broadband photoinduced species and enabled photodetection in MXenes