Abstract:Membrane separation and advanced oxidation processes (AOPs) have been respectively demonstrated to be effective for a variety of water and/or wastewater treatments. Innovative integration of membrane with catalytic oxidation is thus expected to be more competing for more versatile applications. In this study, ceramic membranes (CMs) integrated with manganese oxide (MnO2) were designed and fabricated via a simple one-step ball-milling method with a high temperature sintering. Functional membranes with different loadings of MnO2 (1.67%, 3.33% and 6.67% of the total membrane mass) were then fabricated. The micro-structures and compositions of the catalytic membranes were investigated by a number of advanced characterisations. It was found that the MnO2 nanocatalysts (10-20 nm) were distributed uniformly around the Al2O3 particles (500 nm) of the membrane basal material, and can provide a large amount of active sites for the peroxymonosulfate (PMS) activation which can be facilitated within the pores of the catalytic membrane. The catalytic degradation of 4-hydroxylbenzoic acid (HBA), which is induced by the sulfate radicals via PMS activation, was investigated in a cross-flow membrane unit. The degradation efficiency slightly increased with a higher MnO2 loading. Moreover, even with the lowest loading of MnO2 (1.67%), the effectiveness of HBA degradation was still prominent, shown by that a 98.9% HBA degradation was achieved at the permeated side within 30 min when the initial HBA concentration was 80 ppm. The stability and leaching tests revealed a good stability of the catalytic membrane even after the 6th run. Electron paramagnetic resonance (EPR) and quenching tests were used to investigate the mechanism of PMS activation and HBA degradation. Both sulfate radicals (SO4•-) and hydroxyl radicals (•OH) were generated in the catalytic membrane process. Moreover, the contribution from non-radical process was also observed. This study provides a novel strategy for preparing a ceramic membrane with the function of catalytic degradation of organic pollutants, as well as outlining into future integration of separation and AOPs.

Ultrafast Flowing Oxidation Reactions in the CoTiO3/TiO2 Heterojunction Assembled on Ceramic Membranes: Properties and Electron Shuttle Mechanism

Highly Efficient Manganese (III) Oxide Submerged Catalytic Ceramic Membrane for Nonradical Degradation of Emerging Organic Compounds

Fabrication of Co3O4-Bi2O3-Ti Catalytic Membrane for Efficient Degradation of Organic Pollutants in Water by Peroxymonosulfate Activation.

Development of CuCo 2 O 4 integrated ceramic membrane for peroxymonosulfate activation: An efficient oxidation process for bisphenol A degradation

Single-Atom Cobalt-Modified Catalytic Membrane for Pollutant Degradation with High Tolerance of Environmental Interferences

A Novel Copper Oxide/titanium Membrane Integrated with Peroxymonosulfate Activation for Efficient Phenolic Pollutants Degradation.

Development of CuO Coated Ceramic Hollow Fiber Membrane for Peroxymonosulfate Activation: a Highly Efficient Singlet Oxygen-Dominated Oxidation Process for Bisphenol a Degradation

Manganese oxide integrated catalytic ceramic membrane for degradation of organic pollutants using sulfate radicals.

Efficient Activity of CoCu@SiC Catalytic Ceramic Membrane Via H2 Reduction Treatment for Pollutants Degradation

Ultrahigh-flux 2D CoO@MoS2 Composite Membrane Activated Peroxymonosulfate Through Enhanced Electron Transfer for Rapid Degradation of Refractory Benzotriazole

Fabrication of Cu1.4Mn1.6O4 Modified Catalytic Ozonation Ceramic Membrane for Membrane Fouling Elimination and Micro‐pollutant Degradation

Gravity-driven Fe-doped CoTiO3/SiO2 Fiber Membrane with Open Catalytic Network: Activation of Peroxymonosulfate and Efficient Pollutants Removal

Ceramic Catalytic Membrane with Low Metal Ion Leaching for Bisphenol A Removal Via Peroxymonosulfate Activation

Oxygen Vacancy Mediated Photocatalysis of Ti3C2 MXene Quantum Dots/w18o49 Hybrid Membrane for Peroxymonosulfate-Enhanced Oxidation Degradation

Co@N-C Nanocatalysts Anchored in Confined Membrane Pores for Instantaneous Pollutants Degradation and Antifouling Via Peroxymonosulfate Activation

Anchoring CoTiO 3 /TiO 2 heterostructure on fiber network actuates flow-through Fenton-like oxidation: Electronic modulation and rapid pollutants degradation

Inert Magnesium-Doped Co3O4 Spinel Assembling Catalytic Membrane for Instantaneous Peroxymonosulfate Activation and Contaminants Elimination

Enhanced Persulfate Activation in Confinement Ceramic Membrane for Rapid Degradation of Pollutants

Bi-metal oxide-modified flat-sheet ceramic membranes for catalytic ozonation of organic pollutants in wastewater treatment

Catalytic ceramic membrane integrated with granular activated carbon for efficient removal of organic pollutants

Activating peroxymonosulfate with MOF-derived NiO-NiCo2O4/titanium membrane for water treatment: A non-radical dominated oxidation mechanism