Abstract:The development of a flexible wearable piezoelectric power device has recently caught extensive attention, especially in making inorganic piezoelectric ceramics into polymers from a composite with excellent piezoelectric response. As inorganic piezoelectric fillers, an oriented polycrystal can improve the mechanical energy efficiency of piezoelectric nanogenerators. Herein, the two-dimensional BaTiO3-oriented polycrystals are prepared via a two-step hydrothermal process based on a topochemical conversion mechanism. Additionally, a high-performance piezoelectric nanogenerator was successfully fabricated using the polydimethylsiloxane (PDMS) polymer and BaTiO3-oriented polycrystals. The flexible piezoelectric nanogenerator with 30 wt % BaTiO3 exhibited optimal piezoelectric performance, with an output open-circuit voltage of 13.0 V and a short-circuit current of 200 nA under a periodic mechanical bend–release mode. More importantly, an effective power of approximately 2.6 μW was achieved at a low load resistance of 35 MΩ, suggesting a large potential for applications of electronic skins and self-powered devices. The device efficiently harvests biomechanical energy from human activities and exhibits stable output voltage and current of approximately 8 V and 150 nA, respectfully, demonstrating great promise as a wearable energy harvester. This work demonstrates that oriented nanocrystals in combination with a polymer matrix can lead to the design of high-efficiency piezoelectric nanogenerators that are particularly useful in artificial intelligence, soft robotics, and biomedical devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c07875.XRD and FE-SEM of the KTLO and HTO crystals. Raman spectra of composite films. SEM-EDS mapping images of composite film. Piezoelectric coefficients (d33) of the composite films. P–E hysteresis loop for the BT ceramics and PDMS film. Output performance of the PENG devices with different BT weight fractions. Schematic diagram of the test circuit. Calculated results of the stress distribution. (PDF)This article has not yet been cited by other publications.

Flexible BTO Piezoelectric Generator Fabricated by Hydrothermal Method with the Assistance of Lignocellulose and Carbon Nanomaterials

Flexible cellulose-based piezoelectric composite membrane involving PVDF and BaTiO3 synthesized with the assistance of TEMPO-oxidized cellulose nanofibrils

The construction of BaTiO 3 -based core-shell composites for high-performance and flexible piezoelectric nanogenerators

Flexible composites with Ce-doped BaTiO3/P(VDF-TrFE) nanofibers for piezoelectric device

Piezoelectric Nanogenerators Based On BaTiO3/PDMS Composites for High-Frequency Applications

High output flexible polyvinylidene fluoride based piezoelectric device incorporating cellulose nanofibers/BaTiO3@TiO2 piezoelectric core-shell structure

Screen Printing of Surface-Modified Barium Titanate/Polyvinylidene Fluoride Nanocomposites for High-Performance Flexible Piezoelectric Nanogenerators

Carbon Nanotubes Doped Cellulose Nanocomposite Film for High Current Flexible Piezoelectric Nanogenerators

Controllable Core-Shell BaTiO<sub>3</sub>@Carbon Nanoparticle-Enabled P(VDF-TrFE) Composites: A Cost-Effective Approach to High-Performance Piezoelectric Nanogenerators

Friction and wear performance of glass fiber reinforced poly-ether-ether-ketone composite against different polymer counterparts

Enhanced Piezoelectric Energy Harvester by Employing Freestanding Single‐Crystal BaTiO3 Films in PVDF‐TrFE Based Composites

Stretchable Unsymmetrical Piezoelectric BaTiO 3 Composite Hydrogel for Triboelectric Nanogenerators and Multimodal Sensors

Stretchable Unsymmetrical Piezoelectric BaTiO3 Composite Hydrogel for Triboelectric Nanogenerators and Multimodal Sensors

High-Performance Piezoelectric Nanogenerator of BTO-PVDF Nanofibers for Wearable Sensing

Porosity manipulation to boost piezoelectric output via supercritical carbon dioxide foaming and surface modification

Mechanical Energy Harvesting and Specific Potential Distribution of a Flexible Piezoelectric Nanogenerator Based on 2-D BaTiO 3 -Oriented Polycrystals

Interface-engineered composite nanofibers for boosting piezoelectric outputs of polymeric nanogenerators

Interface induced performance enhancement in flexible BaTiO3/PVDF-TrFE based piezoelectric nanogenerators

Cellulose/BaTiO3 Aerogel Paper Based Flexible Piezoelectric Nanogenerators and the Electric Coupling with Triboelectricity

Flexible regenerated cellulose/ZnO based piezoelectric composites fabricated via an efficient one-pot method to load high-volume ZnO with assistance of crosslinking

High performance and flexible piezoelectric composite incorporating zinc oxide grown on the oxidized nanocellulose by two-step hydrothermal process