Abstract:ObjectiveThe purpose of this paper is to study the effects of cavitation models on the simulation of full-scale propeller cavitation. MethodsThe minimum rotational speed of the propeller required for cavitation is predicted by the Bernoulli equation, and the propeller's cavitation condition is observed by full-scale experiment. After determining the boundary layer mesh thickness and establishing the hydrodynamic model, meshes are generated. In the numerical simulation, the turbulence model is selected from either the standard \begin{document}$k - \varepsilon $\end{document} model or Realizable \begin{document}$k - \varepsilon $\end{document} model, and the cavitation model is selected from either the Schnerr−Sauer (S−S) model or the Zwart−Gerber−Belamri (ZGB) model. The maximum gas volume fraction on the surface of the propeller is tracked and recorded. In the meantime, the reliability of the numerical simulation is evaluated by observing the gas distribution on the surface of the propeller. And the simulation accuracy of the related models is compared. ResultsThe simulation results show that compared with the standard \begin{document}$k - \varepsilon $\end{document} turbulence model, the cavitation region obtained with the Realizable \begin{document}$k - \varepsilon $\end{document} model is significantly more consistent with the experimental results. By monitoring the maximum gas volume fraction on propeller's surface, it is found that the choice of turbulence model has little effect on the cavitation intensity, and the cavitation intensity obtained by S−S model is significantly higher than that obtained by the ZGB model. ConclusionsThis study shows that the turbulence model has a great influence on the area of the cavitation region, and cavitation models have a great influence on cavitation intensity. In terms of the simulation of propeller cavitation, the accuracy of the Realizable \begin{document}$k - \varepsilon $\end{document} model is higher than that of the standard \begin{document}$k - \varepsilon $\end{document} model.

Numerical Investigation of a High-Speed Submerged Cavitating Water Jet Based on Different Turbulence Models

Numerical Research of the Submerged High-Pressure Cavitation Water Jet Based on the RANS-LES Hybrid Model

Numerical Simulation on Supercavity Characteristics of Disc Cavitator Based on SST Turbulence Model

Numerical investigation of submerged cavitation jet based on stress-blended eddy simulation

Numerical simulations of cavitating water jet by an improved cavitation model of compressible mixture flow with an emphasis on phase change effects

Combined Experimental and Numerical Analysis of Cavitating Flow Characteristics in an Axial Flow Waterjet Pump

A New Turbulent Viscosity Correction Model With URANS Solver for Unsteady Turbulent Cavitation Flow Computations

Numerical Simulation of Cavitation and Damping Force Characteristics for a High-Speed Supercavitation Vehicle

On unsteady cavitation flow of a high-speed submerged water jet based on data-driven modal decomposition

Numerical investigation of cavitation-vortex interaction in a mixed-flow waterjet pump

Comparative Study of Different Turbulence Models for Cavitational Flows Around NACA0012 Hydrofoil

Numerical Investigation of Multistage Cavity Shedding Around a Cavitating Hydrofoil Based on Different Turbulence Models

Numerical Simulation of Control Method of Supercavitation

Numerical Investigation of Unsteady Cavitation Dynamics over a NACA66 Hydrofoil Near a Free Surface

Numerical Simulation of Unsteady Cavitating Flows of Pumpjet Propulsor

Comparative study on related models of propeller cavitation numerical simulation

A comparative evaluation of turbulence models for simulation of unsteady cavitating flows

Numerical Modeling of Unsteady Cavitating Flow over a Hydrofoil with Consideration of Surface Curvature

Cavitation Evolution Around a NACA0015 Hydrofoil with Different Cavitation Models Based on Level Set Method

Numerical Modelling Of Cavitation Inception In High-Speed Cavitating Flow: One-Fluid/Free-Lagrange Model

Numerical Simulation of the Cavitation Micro–jet Velocity and Erosion on a Plane–convex Hydrofoil with Semicylindrical Obstacle