Abstract:Coupling method of fiber reinforcement and microbial induced carbonate precipitation (MICP) stabilization was adopted to improve the tensile behaviors of calcareous sand. Three types of fibers, including polypropylene fiber (PF), carbon fiber (CF), and basalt fiber (BF), were used to prepare fiber-reinforced MICP-stabilized calcareous sand samples with various fiber contents and lengths. Direct tensile tests were conducted on a specially designed 8-shaped sample to evaluate the tensile behaviors of the samples. Experimental results revealed that the coupled use of fiber reinforcement and MICP stabilization technique could significantly improve the calcareous sand tensile behaviors. By adding the fibers of PF, CF, and BF, the maximum tensile strength of the sample was increased by 234.0%, 111.8%, and 100.7%, and the corresponding maximum residual strength reached 26.8 kPa, 30.63 kPa, and 50.7 kPa, and their maximum failure displacement was increased by 121.2%, 95.4%, and 100%, respectively compared to the MICP stabilized sample. The coupling mechanism was attributed to the fiber inclusion promoting the calcium carbonate precipitation and forming more effective and extra-effective bonding. The interfacial shear resistance between fibers, calcium carbonate, and calcareous sand and the bridging performance of the crossing fibers facilitated the coupling effect. For all three types of fibers, the higher the fiber content, the greater the tensile strength, residual strength, and failure displacement. The tensile behaviors varied due to the difference in surface properties and mechanical properties of the fiber. PF had the best reinforcement performance on tensile behavior. For the sample with PF (0.1% fiber content), the optimal fiber length was 6 and 9 mm. Moreover, a theoretical relationship between the tensile strength increment and fiber content or fiber length was established. The results of this study are of some significance for the stability and safety of coastal engineering.

Tensile Strength and Fracture of Interparticle MICP Bonds

Fracture of Interparticle MICP Bonds under Compression

Interface Shear Behavior Between MICP-Treated Calcareous Sand and Steel

Study on the Effects and Mechanism of the Reinforcement of Soft Clay Via Microbially Induced Carbonate Precipitation

Desiccation Cracking Behavior of MICP-Treated Bentonite

Enhancing strength of MICP-treated sandy soils: from micro to macro scale

Insight into the mechanism of microbially induced carbonate precipitation treatment of bio-improved calcareous sand particles

Review of Strength Improvements of Biocemented Soils

Morphological Changes of Calcium Carbonate and Mechanical Properties of Samples during Microbially Induced Carbonate Precipitation (MICP)

Investigation of the effect of microbial-induced calcite precipitation treatment on bio-cemented calcareous sands using discrete element method

Compressive Strength of MICP-Treated Silica Sand with Different Particle Morphologies and Gradings

Restraint of Particle Breakage by Biotreatment Method

Use of microfluidic experiments to optimize MICP treatment protocols for effective strength enhancement of MICP-treated sandy soils

Shear resistance of MICP cementing material at the interface between calcareous sand and steel

Coupling Effect of Fiber Reinforcement and MICP Stabilization on the Tensile Behavior of Calcareous Sand

Single-Particle Crushing Test of Coated Calcareous Sand Based on MICP

Micromechanical Properties of Biocemented Shale Soils Analyzed Using Nanoindentation Test

3D DEM modeling of biocemented sand with fines as cementing agents

Effects of calcium sources and magnesium ions on the mechanical behavior of MICP-treated calcareous sand: experimental evidence and precipitated crystal insights

Micro-macro investigation on bio-cemented sand under different grouting saturation: an effective enhancement method

Effects of Different Types of Fibers on the Physical and Mechanical Properties of MICP-Treated Calcareous Sand