Abstract:Purpose Hydrofracturing technology has been widely used in tight oil and gas reservoir exploitation, and the fracture network formed by fracturing is crucial to determining the resources recovery rate. Due to the complexity of fracture network induced by the random morphology and type of fluid-driven fractures, controlling and optimising its mechanisms is challenging. This paper aims to study the types of multiscale mode I/II fractures, the fluid-driven propagation of multiscale tensile and shear fractures need to be studied. Design/methodology/approach A dual bilinear cohesive zone model (CZM) based on energy evolution was introduced to detect the initiation and propagation of fluid-driven tensile and shear fractures. The model overcomes the limitations of classical linear fracture mechanics, such as the stress singularity at the fracture tip, and considers the important role of fracture surface behaviour in the shear activation. The bilinear cohesive criterion based on the energy evolution criterion can reflect the formation mechanism of complex fracture networks objectively and accurately. Considering the hydro-mechanical (HM) coupling and leak-off effects, the combined finite element-discrete element-finite volume approach was introduced and implemented successfully, and the results showed that the models considering HM coupling and leak-off effects could form a more complex fracture network. The multiscale (laboratory- and engineering-scale) Mode I/II fractures can be simulated in hydrofracturing process. Findings Based on the proposed method, the accuracy and applicability of the algorithm were verified by comparing the analytical solution of KGD and PKN models. The effects of different in situ stresses and flow rates on the dynamic propagation of hydraulic fractures at laboratory and engineering scales were investigated. when the ratio of in situ stress is small, the fracture propagation direction is not affected, and the fracture morphology is a cross-type fracture. When the ratio of in situ stress is relatively large, the propagation direction of the fracture is affected by the maximum in situ stress, and it is more inclined to propagate along the direction of the maximum in situ stress, forming double wing-type fractures. Hydrofracturing tensile and shear fractures were identified, and the distribution and number of each type were obtained. There are fewer hydraulic shear fractures than tensile fractures, and shear fractures appear in the initial stage of fracture propagation and then propagate and distribute around the perforation. Originality/value The proposed dual bilinear CZM is effective for simulating the types of Mode I/II fractures and seizing the fluid-driven propagation of multiscale tensile and shear fractures. Practical fracturing process involves the multi-type and multiscale fluid-driven fracture propagation. This study introduces general fluid-driven fracture propagation, which can be extended to the fracture propagation analysis of potential fluid fracturing, such as other liquids or supercritical gases.

How Energy Dissipation Mode Controls the Evolution of Multiple Plane‐Strain Hydraulic Fractures under Isotropic Stresses

DEM Modeling of Simultaneous Propagation of Multiple Hydraulic Fractures Across Different Regimes, from Toughness- to Viscosity-Dominated

Propagation of a plane-strain hydraulic fracture accounting for a rough cohesive zone

A Numerical Simulation of High-Temperature Rock Hydraulic Fracturing Based on Coupled Thermo-Mechanical Peridynamics

Roughness control on multiphase flow in rock fractures

Dual bilinear cohesive zone model-based fluid-driven propagation of multiscale tensile and shear fractures in tight reservoir

How Does the Heterogeneous Interface Influence Hydraulic Fracturing?

Three-dimensional buoyant hydraulic fracture growth: constant release from a point source

How Stress Barriers and Fracture Toughness Heterogeneities Arrest Buoyant Hydraulic Fractures

Deflection of Hydraulic Fractures and Shear Stress Disturbance Considering Thermal Effects: A Numerical Case Study

Simulation of Shear and Tensile Fractures Using Ductile Phase Field Modelling with the Calibration of P Wave Velocity Measurement and Moment Tensor Inversion

Numerical Simulation of 3D Hydraulic Fracturing Based on an Improved Flow-Stress-Damage Model and a Parallel FEM Technique

Modeling of fracture geometry alteration and fracture flow evolution under geostress and water-rock interaction

Evolution of Strength and Permeability in Stressed Fractures with Fluid–Rock Interactions

A Hydromechanical Model for a Single Rock Fracture Subjected to Shearing

Hydraulic Fracturing Mechanism of Rock Mass under Stress-Damage-Seepage Coupling Effect

Numerical Study of Simultaneous Growth of Multiple Hydraulic Fractures from a Horizontal Wellbore Combining Dual Boundary Element Method and Finite Volume Method

Dynamics of fluid-driven fractures across material heterogeneities

Investigation of coupled hydro-mechanical modelling of hydraulic fracture propagation and interaction with natural fractures

Modelling of hydro-mechanical coupling and transport in densely fractured rock mass

Investigation of thermal-hydro-mechanical coupled fracture propagation considering rock damage