Abstract:A significant obstacle that persists in the field of membrane-based gas separation is the development of advanced membranes. In this study, a series of thermally rearranged (TR) membrane precursors (6FDA/ODA/6FAP) with gradient concentration of 6FAP was selected for carbon molecular sieve membranes (TR-CMS) formation. The investigation into the structural evolution from polyimide to TR precursor and finally to CMS membrane utilized various characterization techniques to manipulate the relationship between membrane structure formation and their separation performance. Results show that the structural properties of intermediate TR-polymers, strongly influenced by the –OH content, significantly affect the resultant CMS membrane performance. Specifically, a higher –OH concentration in pristine membrane at 450 °C increases chain rigidity and FFV, leading to a more open pore structure and enhanced gas permeability in TR membranes. Interestingly, TR-CMS derived from increased PBO content exhibits a marked decrease in BET surface area, which correlates with improved molecular sieving performance. This can be attributed to the increased PBO content in the precursor, facilitated degradation upon further heating, thus leads to more orderly structure of the resulting CMS, thereby significantly enhanced molecular sieving performance. The TR-CMS-0.5 sample exhibited the most favorable gas separation performance (P H2 = 3843 and P CO2 = 901 Barrer) as well as high H 2 /CH 4 (6 1 0) and CO 2 /CH 4 (1 4 3) selectivity, which exceeded the 2019 Upper bound line. In addition, the TR-CMS-0.5 demonstrates a remarkable mixed-gas CO 2 /CH 4 (50:50) separating performance that far exceeding its 2018 Upper bound line. In conclusion, the adoption of gradient PBO precursors for preparation of CMS membrane materials show great potential for hydrogen recovery and CO 2 removal from natural gas.

Unraveling the Relationship Between Microstructure of CMS Membrane and Gas Transport Property Using Molecular Simulation

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by in Situ Polymerization

Molecular Simulation and Optimization on the Microporous Structure in Carbon Molecular Sieve Membrane for CO2/CH4 Separation

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Advanced carbon molecular sieve membranes derived from molecularly engineered cross-linkable copolyimide for gas separations

Leveraging Molecular Scale Free Volume Generation to Improve Gas Separation Performance of Carbon Molecular Sieve Membranes

Carbon Molecular Sieve Membrane with Tunable Microstructure for CO2 Separation: Effect of Multiscale Structures of Polyimide Precursors

Development of Computer Simulation on the Mechanism of Gas Separation Through Carbon Molecular Sieve Membranes

Remarkably enhanced molecular sieving effect of carbon molecular sieve membrane by enhancing the concentration of thermally rearranged precursors

Separation of C1/C3 Binary Organic Gas Mixtures Via Flexible Nanoporous Carbon Molecular Sieves: DFT Calculations and MD Simulations

Transport properties of O2, N2, and CO2 through the CMS membranes derived from tris(4‐aminophenyl)amine‐based polyimides

Zigzag Pore Based Molecular Simulation on the Separation of CO2/CH4 Mixture by Carbon Membrane

Analysis of Influencing Factors on the Gas Separation Performance of Carbon Molecular Sieve Membrane Using Machine Learning Technique

A Review on the Progress in Nanoparticle/C Hybrid CMS Membranes for Gas Separation

Synergistic Tuning of Microstructure and Morphology in Carbon Molecular Sieve Hollow Fibers for Propylene/Propane Separation

Thermodynamic–Kinetic Synergistic Separation for O 2 /N 2 and CO 2 /CH 4 on Nanoporous Carbon Molecular Sieves

Effectsof Structure and Surface Property on Adsorptive Separation of Carbon Molecular Sieve for CH4/N2 and CO2/N2

Carbon molecular sieve membranes fabricated at low carbonization temperatures with novel polymeric acid porogen for light gas separation

Carbon Molecular Sieve Membranes with Ultra‐Thin Selective Skin Layer by Pyrolysis of Porous Hollow Fibers

New Insights into Physical Aging‐Induced Structure Evolution in Carbon Molecular Sieve Membranes

Huge improved gas separation performance of carbon molecular sieve membrane by forming a double crosslinked polyimide precursor