Abstract:A proof-of-concept gas sensor based on a miniaturized and integrated fiber-optic photoacoustic detection module was introduced and demonstrated for the purpose of developing a custom tuning-fork (TF)-enhanced photoacoustic gas sensor. Instead of piezoelectric quartz tuning fork (QTF) in conventional quartz-enhanced photoacoustic spectroscopy (QEPAS), a low-cost custom aluminum alloy TF fabricated by mechanical processing was employed as a photoacoustic transducer and the vibration of TF was measured by fiber-optic Fabry-Pérot (FP) interferometer (FPI). The mechanical processing-based TF design scheme greatly increases the flexibility of the TF design with respect to the complex and expensive manufacture process of custom QTFs, and thus it can be better exploited to detect gases with slow vibrational-translational (V-T) relaxation rates and combine with light sources with poor beam quality. The resonance frequency and the quality factor of the designed custom TF at atmospheric pressure were experimentally determined to be 7.3 kHz and 4733, respectively. Dual-prong differential measurement method was proposed to double the photoacoustic signal and suppress the external same-direction noise. After detailed optimizing and investigating for the operating parameters by measuring H2O, the feasibility of the developed sensor for gas detection was demonstrated with a H2O minimum detection limit (MDL) of 1.2 ppm, corresponding to a normalized noise equivalent absorption (NNEA) coefficient of 3.8 × 10-8 cm-1 W/Hz1/2, which are better than the QTF-based photoacoustic sensors. The proposed gas sensing approach combined the advantages of QEPAS and fiber-optic sensing, which can greatly expand the application domains of PAS-based gas sensors.

Open-closed Single-Tube On-Beam Tuning-Fork-enhanced Fiber-Optic Photoacoustic Spectroscopy

Miniaturized and highly-sensitive fiber-optic photoacoustic gas sensor based on an integrated tuning fork by mechanical processing with dual-prong differential measurement

Ultra-High Sensitive Photoacoustic Spectrometer For Trace Gas Detection Based On Fiber-Optic Acoustic Sensors

Tube-cantilever double resonance enhanced fiber-optic photoacoustic spectrometer

All-Optical Cantilever-Enhanced Photoacoustic Spectroscopy in the Open Environment

Air-Backed Mandrel Fiber Optic Microphone with a Resonant Photoacoustic Tube

Ultra-high Sensitive Fiber-Optic Fabry-Perot Cantilever Enhanced Resonant Photoacoustic Spectroscopy

Fiber-Tip Gas Transducer Based on All-Optical Photoacoustic Spectroscopy

Research on Fiber-Optic Cantilever-Enhanced Photoacoustic Spectroscopy for Trace Gas Detection

Mid-Infrared Hollow-Core Fiber Based Flexible Longitudinal Photoacoustic Resonator for Photoacoustic Spectroscopy Gas Sensing

An all-optical photoacoustic spectrometer for trace gas detection

High-Sensitivity Photoacoustic Gas Detector By Employing Multi-Pass Cell And Fiber-Optic Microphone

Tunable Fiber Laser and Fiber Amplifier Based Photoacoustic Spectrometer for Trace Gas Detection

Tunable fiber laser based photoacoustic spectrometer for multi-gas analysis

A Novel Photoacoustic Spectroscopy System Using Diphragm Based Fiber Fabry-Perot Sensor

Fiber-Optic Photoacoustic Gas Sensor with Multiplexed Fabry-Perot Interferometric Cantilevers

An All-Optical Photoacoustic Spectrometer for Remote Detection of Acetyelene Gas in Power Transformer

Fiber-amplifier-enhanced Resonant Photoacoustic Sensor for Sub-Ppb Level Acetylene Detection

Photoacoustic spectrometer based on a near-infrared tunable diode laser

Ultra-High Sensitive Multipass Absorption Enhanced Fiber-Optic Photoacoustic Gas Analyzer

Fiber-Optic Photoacoustic Gas Sensor with Multiplexed Fabry-Pérot Interferometric Cantilevers