Abstract:As the performance requirements for lithium-ion batteries (LIBs) increase, it is particularly important to research and develop new electrodes for lithium-ion batteries. In this work, a 3×3×1 supercell of VS2 are constructed by means of the first-principles method based on density functional theory to study the possibility of using it as an anode material for lithium-ion batteries. Through the analysis of the energy band diagram, it is found that VS2 has metallic properties. Combined with the density of states diagram, it can be analyzed that the energy band near the Fermi level of VS2 is contributed by the 3d state of V and the 3p state electrons of S. This means that the conductive properties of VS2 are largely affected by the 3d state of V and the 3p state electrons of S. Among the vacancies, bridge sites, and top sites, the top site of lithium adsorbing vanadium (V) has the lowest adsorption energy, indicating that lithium will preferentially adsorb the top site of vanadium (V). Through first-principles molecular dynamics simulations of the top position of adsorbed vanadium (V), it was found that at a temperature of 300k, the total energy of the system and the magnitude of the total temperature fluctuation can reach a steady state, indicating that lithium can exist stablyadsorbed vanadium (V) top position. Moreover, the interlayer spacing of the double-layer VS2 reaches 3.67Å, which is larger than the interlayer spacing of graphene. From the top position to the vacancy, its diffusion barrier is only 0.20eV. The interlayer spacing is larger than double-layer graphene, and the diffusion barrier is lower than graphene, indicating that lithium has very good diffusivity on the VS2 surface, and lithium can migrate quickly on the VS2 surface, which is conducive to the rapid charge-discharge process of LIB. In addition to excellent electrical conductivity, VS2 also has good mechanical properties. The calculated Young's modulus is 96.82 N/m, and the Young's modulus and Poisson's ratio do not decrease after adsorbing lithium, indicating that the rigidity of VS2 will not be reduced during the diffusion and migration process of lithium. On the other hand, it has excellent deformation resistance. In order to be more accurate and close to the actual situation, a double-layer VS2 model was constructed, and the maximum number of lithium adsorbed between layers was 18. The calculated theoretical capacity of VS2(466 mAh/g) is higher than the theoretical capacity of graphene (372 mAh/g). Our results suggest that VS2 can be used as a promising anode material for lithium-ion batteries with excellent electrical conductivity and mechanical rigidity.

Performance of -S and -O Bifunctional V2c Mxene Monolayer in Lithium-Ion Batteries: A First-Principles Study

Performances of O- and S-functionalized Mo2C monolayer in lithium ion batteries: Theoretical and experimental research

Theoretical Study of Catalytic Performance of Pristine M2C and Oxygen-Functionalized M2CO2 MXenes As Cathodes for Li-N2 Batteries

First-principles prediction of a two-dimensional vanadium carbide (MXene) as the anode for lithium ion batteries

Composite of Two-Dimensional Titanium Carbonitride Mxene and Nano-Sulfur As Cathode for Li-S Batteries

Atomic Cobalt Covalently Engineered Interlayers for Superior Lithium-Ion Storage

V4C3 MXene: a Type-II Nodal Line Semimetal with Potential as High-Performing Anode Material for Mg-Ion Battery

Preparation of (Vx, Ti1−x)2C MXenes and their performance as anode materials for LIBs

Theoretical study on lithium storage performance of V-doped Ti2CO2 MXene

Phase transition and electrochemical properties of S-functionalized MXene anodes for Li-ion batteries: a first-principles investigation

Tailoring Alkalized and Oxidized V2CTx as Anode Materials for High-Performance Lithium Ion Batteries

Atomic Sn4+ Decorated into Vanadium Carbide MXene Interlayers for Superior Lithium Storage

Preparation of High-Purity V2C MXene and Electrochemical Properties As Li-Ion Batteries

Toward an Understanding of Bimetallic MXene Solid‐Solution in Binder‐Free Electrocatalyst Cathode for Advanced Li–CO2 Batteries

Two-dimensional vanadium carbide (V 2 C) MXene derived heterostructures for high-performance lithium storage

Flatten the Li-ion Activation in Perfectly Lattice-matched MXene and 1T-MoS2 Heterostructures via Chemical Functionalization

Theoretical Insights into the Favorable Functionalized Ti 2 C-Based MXenes for Lithium–Sulfur Batteries

Nb2C and Nb2CO2 MXenes as Anodes in Li-Ion Batteries: A Comparative Study by First-Principles Calculations

First-principles Study of VS2 As Anode Material for Li-ion Batteries

Construction of hierarchical V4C3-MXene/MoS2/C nanohybrids for high rate lithium-ion batteries

In-situ construction of metallic oxide (VNbO5) on VNbCTx MXene for enhanced Li-ion batteries performance