Abstract:<section class="article-section__content"><p>A design study was undertaken of a 100 kW natural gas solid oxide fuel cell (SOFC)/gas turbine (GT) hybrid system to evaluate the impacts of the reforming process under a broad range of SOFC fuel utilizations. An equilibrium reformer model and a one-dimensional SOFC model are employed to perform system study for this hybrid, while balance of plant model is built in Ebsion to simulate the associated performance of GT cycle. Fifty design cases with varied external fuel reforming temperatures are analyzed based on different SOFC fuel utilization levels. With the decrease of reforming temperature, optimal fuel utilization in terms of efficiency shift from 90% with external reforming to 60% with internal reforming. Highest efficiency up to 74% was achieved with internal reforming, but this came with 1275 K cathode inlet air temperature and 1673 K turbine inlet temperature, which no current fuel cell and few GTs can tolerate. High fuel pre-reforming rates provided a higher design flexibility and showed opportunities of efficiency improvement with appropriate thermal integration strategy. And the feasibility of achieving high efficiencies in the hybrid system with thermally integrated external reforming will be explored in our future work.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Novelty Statement</h3><p>Both fuel reforming process and fuel utilization could affect the heat and energy balance in the hybrid gas solid oxide fuel cell (SOFC)-gas turbine (GT) system. However, the optimal design condition considering different fuel reforming approaches and SOFC fuel utilization levels was not determined in the literature. In addition, appropriate integration strategies, used to balance the heat and power between the two subsystems (SOFC and GT), are imperative under different fuel reforming approaches and SOFC fuel utilization levels. But, the feasibility of those thermal integration strategies has not been examined in existing studies. This work studied the coupling effects of SOFC fuel utilization and fuel reforming process on system performance of a natural gas hybrid SOFC/GT cycle. Highest efficiency up to 74% was achieved with internal reforming, but this came with 1275 K cathode inlet air temperature and 1673 K turbine inlet temperature, which no current fuel cell and few GTs can tolerate. High fuel pre-reforming rates provided a higher design flexibility and showed opportunities of efficiency improvement with appropriate thermal integration strategy.</p></section>

Optimization Design of Marine Solid Oxide Fuel Cell/ Internal Combustion Engine Hybrid Power System Considering Degradation

Design and Optimization of an Integrated Power System of Solid Oxide Fuel Cell and Marine Low-Speed Dual-Fuel Engine

Assessment of a methanol-fueled integrated hybrid power system of solid oxide fuel cell and low-speed two-stroke engine for maritime application

Integrated analysis and performance optimization of fuel cell engine cogeneration system with methanol for marine application

Efficiency Optimization of SOFC Subject to Degradation and Minimum Power Constraint

Design and Simulation of Ammonia-Fueled SOFC-ICE Hybrid Power System for Ship Application

Design and optimization of a solid oxide fuel cell-inverted gas turbine integrated system with zero carbon emission for distributed cogeneration

Exergy analysis and parameters optimization for zero-carbon/low-carbon fuels on SOFC-engine hybrid system

Optimizing Solid Oxide Fuel Cell Performance to Re-evaluate Its Role in the Mobility Sector

Multi-criteria evaluation and optimization of PEM fuel cell degradation system

Energy and configuration management strategy for solid oxide fuel cell/engine/battery hybrid power system with methanol on marine: A case study

Performance Analysis of SOFC/micro-GT Hybrid System

Performance evaluation and economic analysis of integrated solid oxide electrolyzer cell and proton exchange membrane fuel cell for power generation

A Hierarchical Optimizing Energy Management Strategy for Alleviating Degradation in Fuel Cell Hybrid System

Analysis of the degradation of a Proton Exchange Membrane Fuel Cell for propulsion of a coastal vessel

Design and optimization of hydrogen production by solid oxide electrolyzer with marine engine waste heat recovery and ORC cycle

The Optimal Design of Solid Oxide and Molten Carbonate Fuel Cells Integration with a CO2 Recycling Unit: an Attempt to Reach a Clean Transition Process

Optimization of solid oxide fuel cell system integrated with biomass gasification, solar-assisted carbon capture and methane production

The Performance Evaluation of a Hybrid System Combining an Alkaline Fuel Cell with an Inhomogeneous Thermoelectric Generator

Energy, exergy, exergoeconomic, environmental (4E) evaluation and multi-objective optimization of a novel SOFC-ICE-SCO 2 -HRSG hybrid system for power and heat generation

Coupling effects of fuel reforming process and fuel utilization on the system performance of a natural gas solid oxide fuel cell/gas turbine hybrid system