Abstract:The interfacial adhesion and viscoelasticity of an additional mass layer have a significant influence on the resonant frequency of a quartz crystal microbalance (QCM), especially when the attached mass layer is thick. In this study, a detailed quantitative investigation is conducted on the influence of the interface parameter and viscosity coefficient on the resonant frequency and admittance of a QCM. The obtained explicit expression of free vibration of the QCM can be numerically solved using Muller’s method. The results obtained in this study show that the viscoelasticity of the mass layer and its bonding characteristics significantly affect the performances of the QCM, such as the resonance frequency, displacement, and stress distributions, and the peak and bandwidth of admittance. The non-proportional relation between the resonance frequency and thickness of the mass layer becomes obvious when the thickness of the mass layer is larger than 2% that of the quartz plate. Meanwhile, the error between the exact solution and Sauerbrey’s solution is enlarged as the interface parameter increases or the viscosity coefficient decreases. The proposed method will be more precise in solving the resonant frequency than Sauerbrey’s equation does and able to provide a guidance for determining the viscosity of an attached mass layer. The novel points in the article are as follows: (i) The effects of the imperfect interface and viscosity on the resonance frequency of a QCM at different layer thicknesses are investigated. (ii) The difference between effects of the imperfect interface and viscosity on the characteristics of the admittance is discussed in detail.

Coupled Vibration and Frequency Response of a Micropillar-Enhanced QCM Sensor

Ultrasensitive quartz crystal microbalance enabled by micropillar structure

On Thickness-Shear Vibration and Frequency Shift of a Quartz Crystal Resonator Carrying an Array of Micro-Beams Adhered with Tip Nano-Particles

The Effects of Material Properties on Pillar-Based QCM Sensors

An ultrasensitive quartz crystal microbalance-micropillars based sensor for humidity detection

Quartz crystal microbalance based on torsional piezoelectric resonators.

Effects of the Imperfect Interface and Viscoelastic Loading on Vibration Characteristics of a Quartz Crystal Microbalance

Phase and mass relationship of the QCM sensor coated with rigid thin film

A Self-Sustained Mass Sensor with Physical Closed Loop Based on Thermal-Piezoresistive Coupled Resonators

A Novel Qcm Mass Sensing System Incorporated with A 3-Dof Mode Localized Coupled Resonator Stiffness Sensor

Convergence of Dissipation and Impedance Analysis of Quartz Crystal Microbalance Studies

Exploration of the Mass Sensitivity of Quartz Crystal Microbalanceunder Overtone Modes Using Electrodeposition Method

Unfound Associated Resonant Model and Its Impact on Response of a Quartz Crystal Microbalance in the Liquid Phase

A New Method for Measuring Properties of Liquid by Using a Single Quartz Crystal Microbalance

Coupled Analysis on the Thickness-Shear Vibrations of A Quartz Plate Resonator Covered with Micro-Beams Immersed in Inviscid Liquid and Computation of the Induced Frequency-Shift by the Surface Loadings

The Change in Thickness of the Solidified Liquid Layer Rather Than the Immobilized Mass Determines the Frequency Response of a Quartz Crystal Microbalance

Modeling the Response of a Quartz Crystal Microbalance under Nanoscale Confinement and Slip Boundary Conditions.

A Thermal-Piezoresistive Self-Sustained Resonant Mass Sensor with High-Q (>95k) in Air

High‐sensitivity QCM with Multielectrode Piezoelectric Quartz Crystal Design

On Modeling of a Thickness‐shear Vibrating Quartz Crystal Plate Attached with Micro‐beams Immersed in Liquid with Considering Couple Stress Effects

Uniformization of QCM’s Mass Sensitivity Distribution by Optimizing Its Metal Electrode Configurations