Characteristics of ammonia-hydrogen nonpremixed bluff-body-stabilized flames
Adamu Alfazazi,Ayman M. Elbaz,Jiajun Li,Suliman Abdelwahid,Hong G. Im,Bassam Dally
DOI: https://doi.org/10.1016/j.combustflame.2023.113066
IF: 4.4
2023-09-25
Combustion and Flame
Abstract:The combustion of ammonia (NH 3 ) has received much attention over the last few years due to challenges associated with its low reactivity and the emission of nitric oxides. One way to improve the reactivity of NH 3 is to blend it with (H 2 /N 2 ) mixture as the product of its dissociation, before introducing it into energy systems. In this study, experimental measurements were carried out on nonpremixed bluff-body stabilized flames to better understand the flame and emission characteristics of NH 3 /H 2 /N 2 flames. Four fuel mixtures at different NH 3 and (H 2 /N 2 ) ratios were investigated to represent different levels of ammonia cracking. Photography, planar laser-induced fluorescence of OH, thermocouples, and gas analysis techniques were used to understand flame features, reaction zone characteristics, NO, and NH 3 concentration within the flame and at the exhaust. It was observed that a decrease in NH 3 ratio in the mixtures resulted in longer and more stable flame with reduced thermal radiation as compared to NH 3 -rich fuel blends. For the highest NH 3 blend studied, the flames exhibit extinction and re-ignition in the neck zone, as evidenced by OH-planar images and temperature profiles. As the H 2 /N 2 ratio in the fuel mixture is increased, while keeping the Re constant, the momentum flux ratio (jet/co-flow) also increased resulting in a fuel-lean recirculation zone (RZ), and a shift in the maximum temperature and OH region from the outer shear layer to the inner layer next to the central jet. At levels of NH 3 in the fuel mixture above 50% by volume, unburned ammonia slips through the flame and into the exhaust, and the subsequent reburn mechanism resulted in reduced NO emission. CFD simulations using Reynolds-averaged Navier-Stokes (RANS) and the flamelet–progress-variable submodel were conducted and compared with the experimental results. The CFD results helped to qualitatively describe and further explain what was observed in the experiment including the flame appearance, mixing field, and the reaction zone location in the tested flames.
energy & fuels,engineering, chemical, mechanical,thermodynamics, multidisciplinary