Abstract:<p>The emergence of new network technologies and users' ever-increasing demand necessitates the introduction of highly programmable hardware with high flexibility and performance at the network data plane. The switches at the data plane need to be flexible enough to support protocols and test new ideas for increasing the abstraction of network programming. In most studies, Field Programmable Gate Arrays (FPGA) are applied in making switches flexible and reprogrammable; however, applying FPGAs alone does not meet the required flexibility. Next to applying FPGAs, it is necessary to provide an architecture that would allow developers to forego FPGA implementation hardware details and the complexity of hardware description language (HDL). In this paper, a new architecture of a programmable packet processor with high flexibility and programmability at the network data plane is presented, which supports all three operations required in switches: parsing, classification, and processing of packet data. To implement this architecture, the high-level P4 language is applied to allow the description of its register-transfer level (RTL) on the FPGA. In order to increase the processing speed, a pipeline approach within the proposed architecture is designed at the SDN data plane through pre-processing in the parse graph, identifying the traffic flow, and applying the hybrid control flow model in the data processing. The results show that our architecture operates at 320 MHz clock speed, which in comparison with NetFPGA-10G, NetFPGA-SUME, and ML605 peer architectures runs 2, 1.28, and 2.9 times faster in terms of processing speed, attesting to its efficiency. In addition, the evaluation on the Virtex-7 FPGA VC709 platform shows that our architecture consumes approximately 4.3% of lookup tables, 1.9% of flip-flops, and 1.3% of memory blocks, which are less than the hardware resource consumption of peer architectures.</p>

OptimusPrime: Unleash Dataplane Programmability Through a Transformable Architecture

Optimizing Program Deployment with Libopl in Programmable Networks

A high-performance framework for a network programmable packet processor using P4 and FPGA

Enabling In-situ Programmability in Network Data Plane: From Architecture to Language

Accelerating Network Features Deployment with Heterogeneous Platforms

ClickNP: Highly flexible and High-performance Network Processing with Reconfigurable Hardware.

A High-Performance and Flexible Architecture for Accelerating SDN on the MPSoC Platform

The Case for a Flexible Low-Level Backend for Software Data Planes

CLIP: Accelerating Features Deployment for Programmable Switch.

Janus: An Experimental Reconfigurable SmartNIC with P4 Programmability and SDN Isolation

Toward Resource-Efficient and High-Performance Program Deployment in Programmable Networks

Octopus: A Heterogeneous In-network Computing Accelerator Enabling Deep Learning for network

Programmable Switch as a Parallel Computing Device

Demystifying Datapath Accelerator Enhanced Off-path SmartNIC

Data Path Processing in Fast Programmable Routers

Design on the Elastic Protocol Customizable Data Plane and Its Mapping Algorithm

In-situ Programmable Switching using rP4: Towards Runtime Data Plane Programmability

A Large Capacity Programmable Packet Forwarding Device

On the Extreme Parallelism Inside Next-Generation Network Processors

Building Scalable and Flexible Virtual Networks on Programmable Data Plane

High-Performance Reconfigurable Pipeline Implementation for FPGA-Based SmartNIC