Abstract:The effects of the microstructure evolution of amorphous carbon on the tensile behavior of polyacrylonitrile (PAN)-based carbon fibers were investigated. The microstructure as a function of heat treatment temperature was characterized by means of XRD, HRTEM and Raman spectra. It is found that the amorphous carbon content decreases with increasing heat treatment temperature and that the densities of the carbon fibers increase is due to the removal of the impurity elements and the shrinking of the graphite planes. The amorphous carbon parallel to the graphite planes transforms into graphite planes and stacks on the graphite crystallites, leading to the increase in the graphite crystallite thickness. And the graphite crystallite length is increased through the amorphous-to-crystallite transition which occurs at the edges of graphite planes and the coalescence between two adjacent graphite crystallites. It is found that the tensile behavior of PAN-based carbon fibers mainly depends on the microstructure evolution of amorphous carbon. The reactions between sp2 carbon clusters and graphite planes improve the cross-linking among graphite crystallites, which has a positive effect on the tensile strength of the carbon fibers. However, a large number of structural defects and residual stresses, introduced by the rearrangement of graphite planes, are the main reasons for the degradation of the tensile strength. The tensile strains of the carbon fibers decrease and the tensile modulus increase with the decrease in the amorphous carbon content, which are mainly due to the amorphous-to-crystallite transition in the skin region.

Structural Evolution and Micromechanical Property of Amorphous Carbon Particles During Arc Plasma Synthesis

Properties of Tetrahedral Amorphous Carbon Prepared by Vacuum Arc Deposition

A Field Emission Study of the Critical Parameters of Amorphous Carbon Films Deposited on a Variety of Carbonaceous Substrates

Understanding Macroscopic Assemblies of Carbon Nanostructures with Microstructural Complexity

Comparison study on carbon nanomaterial synthesis from methane and acetylene in DC arc plasma

Morphology of Carbon Nanotubes Prepared by Carbon Arc

Deposition of Smooth Tetrahedral Amorphous-Carbon Thin-Films Using A Cathodic Arc Without A Macroparticle Filter

Substitutional Nitrogen Doping of Tetrahedral Amorphous Carbon

The Structure of Boron-, Phosphorus- and Nitrogen-Doped Tetrahedral Amorphous Carbon Deposited by Cathodic Arc

Stationary Carbon Cathodic Arc: Plasma and Film Characterization

Effect of amorphous carbon on the tensile behavior of polyacrylonitrile (PAN)-based carbon fibers

Insights into Irradiation-affected Structural Evolution and Mechanical Behavior of Amorphous Carbon

The morphological transformation of carbon materials from nanospheres to graphene nanoflakes by thermal plasmas

Ab initio structural dynamics of pure and nitrogen-containing amorphous carbon

Complex structure of the carbon arc discharge for synthesis of nanotubes

Products on Electrodes in an Argon-Methane Magnetically Rotating Arc at Atmospheric Pressure

The Effects of Graphite Particles on Arc Plasma Characteristics

Study on Formation Mechanism of Three Types of Carbon Nanoparticles During Ethylene Pyrolysis in Thermal Plasmas

Elucidating the Multi‐scale Temperature Evolution and Densification Mechanisms of Amorphous Powders during Spark Plasma Sintering: Experiments and Modeling

Investigation of Amorphous Carbon in Nanostructured Carbon Materials (A Comparative Study by TEM, XPS, Raman Spectroscopy and XRD)

Structure and Pore Size Distribution in Nanoporous Carbon