Three-Dimensional Direct Numerical Simulation of Flow past A Near-Wall Circular Cylinder: Combined Effects of Gap Ratio and Boundary Layer Thickness on Flow Profiles and Pressure Distribution
Chao Ying,Yang Hua,Yu-han Wei,Chun-ning Ji
DOI: https://doi.org/10.1007/s13344-023-0079-2
IF: 1.253
2024-01-30
China Ocean Engineering
Abstract:Three-dimensional direct numerical simulations of the wake flow downstream of a near-wall circular cylinder at different gap ratios and boundary layer thicknesses are carried out by using the iterative immersed boundary method. The non-dimensional gap between the cylinder and the wall, G/D = 0.2, 0.6 and 1.0, the non-dimensional boundary layer thickness, δ/D = 0.0, 0.7 and 1.6, the Reynolds number, Re =350, and the aspect ratio of the cylinder, L/D = 25 are adopted. High-resolution visualizations of the complex vortex structures at different δ/D and G/D are presented. The transition of the streamwise vortex mode, the combined effects of δ/D and G/D on the flow statistics, the pressure and shear stress distribution and the hydrodynamic forces are analyzed. Results show that with decreasing G/D and increasing δ/D , the gap flow and its vortex-shedding are significantly weakened, together with an elongated wake and an enlarged low-velocity area near the wall, leading to the wake mode transition from the two-sided to one-sided vortex-shedding. Different relative positions of the cylinder regarding the boundary layer alter the flow features of the shear layers. With an increase in δ/D , the front stagnation point shifts to the upper surface, and the distance between the flow divergence point and the maximum pressure position increases. The mean drag coefficient and r.m. s. values of drag and lift coefficients decrease with a decrease in G/D and an increase in δ/D , while the mean lift coefficient increases with decreasing G/D but decreases with increasing δ/D .
engineering, mechanical, civil, ocean,water resources