Abstract:Spontaneous imbibition of fracturing fluid into shale matrix is one of the primary reasons for the low flowback rate in shale gas wells after the hydraulic fracturing. This leads to concerns of impacts on both environment and shale gas production. A direct pore-scale simulation is crucial to gain a deep understanding of spontaneous imbibition behavior and its impacts. The porous structures in the shale matrix are characterized by not only a geometrical complexity but also a mixed wettability, which bring great challenges to simulation methods. An improved pseudo-potential lattice Boltzmann method is proposed to simulate the spontaneous imbibition behavior in a reproduced three-dimensional porous structure of shale. The results show that the nanoscale hydrophilic pores provide the driving force and a storage place for the residual treatment fluid. The pore size and wettability heterogeneity lead to the nonuniform menisci propagation and fracturing fluid distribution in the model. Specifically, the fracturing fluid imbibed quicker in the larger pores at the early stage and gradually migrated into the smaller pores during the process. With a limited volume of the fracturing fluid, a portion of the larger pores was finally reopened. The analysis of saturation and apparent gas permeability data during the spontaneous imbibition process showed a great recovery of the model permeability along with the reopened pores. These results provide direct evidence of the residual fracturing fluid migration pattern in the shale reservoir and its influence on shale gas production. Plain Language Summary Hydraulic fracturing is widely employed to stimulate a shale gas reservoir for a better production. After fracturing, a substantial amount of the fracturing fluid stays in the reservoir even after a period of flowback operations. It is believed that the residual treatment fluid is imbibed into the surrounding shale matrix. However, whether these trapped fracturing fluids impact the shallow aquifers and the shale gas production rates remains to be fully understood. A pore-scale simulation is performed in this work to directly investigate the migration of the fracturing fluid in a reproduced porous structure of shale. The results showed that (1) the nanoscale pores in the shale matrix provide the driving force, namely, the capillary force, and the storage space for holding the fracturing fluids. (2) The nonuniform spontaneous imbibition in the complex shale porous structure results in the fracturing fluid-filled small pores and a portion of reopened large pores. The reopening of the large pores leads to a great recovery of the model transport property of the shale gas. These results can be served as evidence for answering the engineering related problems, such as the low flowback rate of the fracturing fluid and the relatively high gas production after the shut-in operation.

Spatiotemporal Distribution Characteristics of Fracturing Fluid in Multiscale Pore Structure of Deep Marine Shale Gas Reservoirs

Pore-Scale Modeling of Spontaneous Imbibition Behavior in a Complex Shale Porous Structure by Pseudopotential Lattice Boltzmann Method

Distribution Characteristics and Backflow Flow Pattern of a Slickwater Fracturing Fluid in Shale Based on Low-Field Nuclear Magnetic Resonance

Fracturing fluid retention in shale gas reservoir from the perspective of pore size based on nuclear magnetic resonance

Experimental Study of Hydraulic Fracturing for Shale by Stimulated Reservoir Volume

Numerical Simulation of Gas-Water Two-Phase Flow in Deep Shale Gas Reservoir Development Based on Mixed Fracture Modeling

Simulation of Shale Gas Reservoir Production Considering the Effects of the Adsorbed Water Layer and Flow Differences

Experimental Investigation of Fracture Propagation in Clayey Silt Hydrate-Bearing Sediments

Hydraulic Fracturing and Enhanced Recovery in Shale Reservoirs: Theoretical Analysis to Engineering Applications

Formation Damage Mechanisms Due to Hydraulic Fracturing of Shale Gas Wells

Pore-Scale Simulation of Fracture Propagation by CO2 Flow Induced in Deep Shale Based on Hydro-Mechanical Coupled Model

3D Multi-scale Reconstruction of Fractured Shale and Influence of Fracture Morphology on Shale Gas Flow

Experimental Investigation of Proppant Settling in Complex Hydraulic-Natural Fracture System in Shale Reservoirs

Production induced fracture closure of deep shale gas well under thermo-hydro-mechanical conditions

A Dynamic Permeability Model in Shale Matrix after Hydraulic Fracturing: Considering Mineral and Pore Size Distribution, Dynamic Gas Entrapment and Variation in Poromechanics

Effects of Fracture Characteristics on Spontaneous Imbibition in a Tight Reservoir

Investigation of the Effect of Fracturing Fluids on Shale Pore Structure by Nuclear Magnetic Resonance

Fluid Flow Behavior in Nanometer-Scale Pores and Its Impact on Shale Oil Recovery Efficiency

Investigation on the microscopic damage mechanism of fracturing fluids to low-permeability sandstone oil reservoir by nuclear magnetic resonance

Study on Hydraulic Fracture Propagation in Mixed Fine-Grained Sedimentary Rocks and Practice of Volumetric Fracturing Stimulation Techniques

Molecular Insights into Multiphase Transport through Realistic Kerogen-Based Nanopores