Abstract:Metal organic frameworks (MOFs) are of significant interest for photocatalysis using visible light, but they are typically limited by the instability and high recombination ratio of photoexcited pairs. Integrating MOFs into an inorganic semiconductor is one of the most widespread methods to promote their activity. In this study, a core-shell structured MOF@TiO2 (NH2-UiO-66@TiO2) was synthesized as an efficient photocatalyst for the degradation of toluene. Pristine NH2-UiO-66 was synthesized by a hydrothermal method as the core, which was then coated with an amorphous TiO2 shell. Compared with pristine NH2-UiO-66 and other samples prepared by the direct mixing of NH2-UiO-66 and TiO2, NH2- UiO-66@TiO2 exhibited a higher degradation rate of toluene. Using NH2- UiO-66@TiO2 as a catalyst, the degradation efficiency of toluene reached 76.7% within 3 h, which is 1.48 times higher than that of NH2-UiO-66. The degradation performance was also stable in four repeated reuse experiments, and the slight deactivation was reactivated after washing with ethanol. A series of characterization methods were used to determine the physicochemical properties of NH2-UiO-66@TiO2, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Using the measured physicochemical properties, the photocatalytic mechanism of NH2-UiO-66@TiO2 was explored. NH2-UiO-66 is an ideal photocatalyst, with visible-light response and a huge specific surface area (914.9 m(2).g(-1)), which is favorable for the utilization of sunlight as well as the absorption of pollutants in indoor air. In addition, a new interface formed between the two components (NH2-UiO-66 and TiO2), which efficiently broaden the light absorption area and enhanced the utilization of photogenerated species. The photogenerated holes and electrons could transfer through the interlayer as soon as they were formed. It is speculated that holes would transfer to the HOMO of NH2-UiO-66, and then combine with H2O molecules to form hydroxyl radicals (center dot OH). At the same time, more electrons tended to combine with oxygen molecules in the conduction band of TiO2 rather than recombine with holes. Consequently, the recombination rate of electrons and holes decreased, while the quantity of oxygen radicals and hydroxyl radicals increased. Toluene was efficiently oxidized by these two types of radicals. Owing to the outstanding properties mentioned above, the strategy of constructing NH2-UiO-66@TiO2 is considered to be an effective approach. This work may provide new insights into the design of core-shell structured MOF@photocatalysts for the photocatalytic degradation of indoor air pollutants.

The Presence of Mo and O Double Vacancies in Bi2W0.25Mo0.75O6 Solid Solution Promotes Photogenerated Charge Separation and Molecular Oxygen Activation for Efficient Removal of Gaseous Toluene under Visible Light

Efficient degradation of PPCPs by Mo<sub>1-x</sub>S<sub>2-y</sub> with S vacancy at phase-junction: Promoted by innergenerate-H<sub>2</sub>O<sub>2</sub>

Regulation of Electron Density in Pt Nanoparticles Via Bimetallic Metal-Organic Frameworks for Enhancing Photothermal Catalysis of Toluene Decomposition

Robust Photocatalytic Performance of Tio2/Bi2wo6 Photocatalysts with Trace Fe Dopant for Gaseous Toluene Decomposition

The Pivotal Effects of Oxygen Vacancy on Bi2MoO6: Promoted Visible Light Photocatalytic Activity and Reaction Mechanism

Oxygen-vacancy-induced O2 activation and electron-hole migration enhance photothermal catalytic toluene oxidation

Customized Ultrathin Oxygen Vacancy-Rich Bi2W0.2Mo0.8O6 Nanosheets Enabling a Stepwise Charge Separation Relay and Exposure of Lewis Acid Sites toward Broad-Spectrum Photothermal Catalysis

In Situ Growth of Bismuth Oxybromide/bismuth Molybdate 2D/2D Z-scheme Heterojunctions with Rich Interfacial Oxygen Vacancies for Photocatalytic Benzylic C(sp3)-H Bond Activation

Oxygen vacancy and Van der Waals heterojunction modulated interfacial chemical bond over Mo2C/Bi4O5Br2 for boosting photocatalytic CO2 reduction

In-situ Synthesis of WO3–x/MoO3–x Heterojunction with Abundant Oxygen Vacancies for Efficient Photocatalytic Reduction of CO2

Simultaneous Introduction of 0D Bi Nanodots and Oxygen Vacancies Onto 1D Bi6Mo2O15 Sub-Microwires for Synergistically Enhanced Photocatalysis

Unraveling the Synergistic Role of Oxygen Vacancy and Co Dual-Site Pairs in MOFs-derived Defect-Engineered Co3O4 Catalysts with a Hollow Architecture for Photothermal OVOCs Degradation: Formation of Reactive Oxygen Species

Photocatalytic Reduction of CO2 on a Bi2MoxW1-xO6 Solid Solution with Enhanced Activity.

Molybdenum Sulfide (MoS2)/Ordered Mesoporous Carbon (OMC) Tubular Mesochannel Photocatalyst for Enhanced Photocatalytic Oxidation for Removal of Volatile Organic Compounds (VOCs)

Utter degradation of toluene with inhibiting the generation of benzene by self-supporting Bi2MoO6 nanoflakes featuring OV-enriched interface

One-step Synthesis of Oxygen Vacancy-Rich SnO2 Quantum Dots with Ultrahigh Visible-Light Photocatalytic Activity

Fabrication of Bi2O3 QDs decorated TiO2/BiOBr dual Z-scheme photocatalysts for efficient degradation of gaseous toluene under visible-light

Oxygen Vacancy Sites Enable Efficient Photocatalytic Oxidation of Nitric Oxide: The Role of W/Mo Valence Transition in Bi2W(Mo)O6‐x

Layered MoSe2/Bi2WO6 Composite with P-N Heterojunctions As a Promising Visible-Light Induced Photocatalyst

Core-Shell Structured NH2-UiO-66@TiO2 Photocatalyst for the Degradation of Toluene under Visible Light Irradiation

Constructing Surface Oxygen Vacancy in the [bi2o2]2+ Layer Defects Mediated Bi2MoO6 Enhanced Visible Light Responsive Photocatalytic Activity