Abstract:Hydrothermal dechlorination has been widely studied for recycling end-of-life polyvinyl chloride while the impact of embedded metal additives, a major component of many waste PVC products, has rarely been reported. In this study, hydrothermal treatment of used polyvinyl chloride pipe was carried out at a temperature range between 220 and 280 degrees C to understand the role of metal additives in the dechlorination process. The potential application of chlorine-free hydrochar as the precursor to prepare CO2 sorbents via chemical activation was also evaluated. The results demonstrated that the well-distributed calcium carbonate in the polyvinyl chloride matrix, acting as an in-situ neutralization agent, could accelerate the dechlorination of PVC, over 98.4% of chlorine was removed at 260 degrees C or higher. Using the hydrochar prepared at 260 degrees C as a single precursor, a series of activated carbons were successfully prepared via a facile chemical activation process. Those hydrochar-derived carbons have a microporous dominant structure with high surface area and total pore volume reaching up to 1927 m2 g-1 and 0.85 cm3 g-1, which showed great potential as CO2 sorbents. Tested at 25 degrees C, the microporous carbons exhibited both remarkable CO2 adsorption capacities of 1.60 mmol g-1 and 4.05 mmol g-1 at 100 kPa and high CO2/N2 selectivity of 42 at 15 kPa CO2. Advanced characterization demonstrated that the excellent CO2 adsorption performance originated from a unique combination of ultra-microporosity and surface chemistry. This work provides an effective and sustainable strategy to recycle hard-to-handle chlorinated plastic waste and reduce carbon emissions.

Upcycling of Polyvinyl Chloride to Porous Carbon for High-Performance Electromagnetic Wave Absorption Materials

Upcycling waste polyvinyl chloride: One-pot synthesis of valuable carbon materials and pipeline-quality syngas via pyrolysis in a closed reactor.

Converting Polyvinyl Chloride Plastic Wastes to Carbonaceous Materials via Room-Temperature Dehalogenation for High-Performance Supercapacitor

Polyvinyl Chloride (PVC) Derived Microporous Carbons Prepared Via Hydrothermal Dechlorination and Potassium Hydroxide Activation for Efficient CO2 Capture

Polyvinyl chloride (PVC) derived microporous carbons prepared via hydrothermal dechlorination and potassium hydroxide activation for efficient CO 2 capture

From polyvinyl chloride waste to activated carbons: the role of occurring additives on porosity development and gas adsorption properties

Upgrading Polyvinyl Chloride by ZnO-Assisted Solvothermal Dehalogenation

Characterization of solid and liquid carbonization products of polyvinyl chloride (PVC) and investigation of the PVC-derived adsorbent for the removal of organic compounds from water

Recycling Polyethylene into High‐Value Porous Carbon Composites for Microwave Absorption

Upcycling of real-world HDPE plastic wastes into high-purity methane and hierarchical porous carbon materials: Influence of plastics additives

Waste Polyvinylchloride Derived Pitch As a Precursor to Develop Carbon Fibers and Activated Carbon Fibers

Porous Carbon/fe Composites from Waste Fabric for High-Efficiency Electromagnetic Wave Absorption

Carbonization of Waste PVC to Develop Porous Carbon Material Without Further Activation

Waste PVC Upcycling: Transferring Unmanageable Cl Species into Value-Added Cl-containing Chemicals

Upcycling of PVC waste to high-value sorbent with KOH-activation for efficient removal of organic dyes

Preparation of carbon nanotubes by catalytic pyrolysis of dechlorinated PVC

Photothermal Upcycling of Waste Polyvinyl Chloride Plastics

Critical advances and assessment on chemo-biological conversions of waste polyvinyl chloride

Dehydrochlorination of polyvinyl chloride in green solvent

Solid Base Assisted Dual-Promoted Heterogeneous Conversion of PVC to Metal-Free Porous Carbon Catalyst.

Sustainable Nanoporous Carbon Catalysts Derived from Melamine Assisted Cross-Linking of Poly(vinyl chloride) Waste for Acetylene Hydrochlorination