Abstract:Self-healing coatings doped by nano-containers loaded with inhibitors have shown remarkable anti-corrosion efficiency and durability in extending metal life and slowing down coating failure. However, low loading capacity of corrosion inhibitors in nano-containers is a problem plaguing the further development and application of smart coatings. In this study, mesoporous silica with large pore sizes (MSN) was synthesized using the soft template method which significantly increased the loading capacity of the corrosion inhibitor, and a smart self-healing composite coating was designed, which could protect carbon steel from corrosion and provide durable protection for it. Specifically, the composite coating (EP/DMTD@MSN-PAA) was prepared by incorporating mesoporous silica nano-containers embedded with 2,5-dimercapto-1,3,4-thiadiazole (DMTD) molecules into the epoxy resin coating. The results of BET test showed that the prepared MSNs had high specific surface area (734.97 m2/g) and large pore volume (0.85 cm3/g). The thermogravimetric (TG) analysis showed 35.7% of loading amount of corrosion inhibitors in the nano-materials. Response release experiments showed that the DMTD@MSN-PAA had of acid-response release characteristics. When pH value of the system decreased from 7 to 3, the release amount of the DMTD molecules increased from 40.3% to 93.7%. The contact angle test showed that the epoxy resin (EP) coating had a contact angle value of 57.7°, while those of the composite coatings doped with 1 wt%, 3 wt% and 6 wt% DMTD@MSN-PAA (EP/DMTD@MSN-PAA) were 65.1°, 75.2° and 67.2°, respectively. These results indicated that the composite coatings had better hydrophobicity compared to the EP coating, and were conducive to prolonging the coating service time. The anti-corrosion performances of both the EP and the composite coatings with different doping amounts of DMTD@MSN-PAA were evaluated by EIS measurements. The R ct value of the EP coating decreased from 190.3 to 25.1 Ω · cm2 within the time of 48 h of immersion in 3.5 wt% NaCl solution, while ones of the EP/DMTD@MSN-PAA coatings doped with 1 wt%, 3 wt% and 6 wt% of DMTD@MSN-PAA increased from 303.1, 720.7.7, 523.4–1426.4, 2113.8, 1066.3 Ω · cm2, respectively. In addition, the corrosion resistance of the EP and composite coatings were further evaluated by etching experiments. The results showed that after 35 d of immersion, compared with that of the EP coating, surface corrosion degree of the composite coatings was lower, and the scaling off speed of the coatings slowed down, which further proved that the composite coating had strong corrosion resistance and special self-healing characteristics.

Self-Healing TiO2/Ti3C2Tx/PDMS Coating with High Mechanical Robustness and Anticorrosion Performance

Self-healing PDMS/SiO2-CaCO3 composite coating for highly efficient protection of building materials

A double-layered self-healing coating system based on the synergistic strategy of cysteine and iron polyacrylate for corrosion protection

Photothermal cyclic self-healing coating with long-term corrosion protection based on bifunctional graphene

Self-healing protective coating with dual reversible bonds triggered by photothermal responsive Co9S8@Bi2S3 hollow core-shell nanofillers

Durable and Hydrophobic Self-Healing Coating with Rapid Thermal Activation and Prolonged Corrosion Resistance

A Multifunctional Coating with Active Corrosion Protection Through a Synergistic pH‐ and Thermal‐Responsive Mechanism

Ultralong-Term Durable Anticorrosive Coatings by Integration of Double-Layered Transfer Self-Healing Ability, Fe Ion-Responsive Ability, and Active/Passive Functional Partitioning

Dual Anticorrosive and Self-healing Coating Based on Multiresponsive Polyaniline Porous Microspheres

Intrinsic Self-Healable, Corrosion-Resistant Silicone Coating Based on Quadruple Hydrogen-Bonded Supramolecular Polymer

Bio-inspired Superhydrophobic Self-healing Surfaces with Synergistic Anticorrosion Performance

Self-Healing Coating with a Controllable Release of Corrosion Inhibitors by Using Multifunctional Zinc Oxide Quantum Dots as Valves

Nanofiber Composite Coating with Self-Healing and Active Anticorrosive Performances

Preparation and properties of silica isophorone diisocyanate microcapsules for self-healing anticorrosive coatings

Photothermally activated self-healing protective coating based on the “close and seal” dual-action mechanisms

Smart nanoarchitectonics of epoxy coating: Preparation, release behavior and self-healing performance based on mesoporous silica nano-containers loaded with DMTD inhibitors

Self-healing epoxy coatings with microencapsulated ionic PDMS oligomers for corrosion protection based on supramolecular acid-base interactions

Intelligent Saline Enabled Self-Healing of Multilayer Coatings and Its Optimization to Achieve Redox Catalytically Provoked Anti-Corrosion Ability

Tannic acid-modified g-C 3 N 4 nanosheets/polydimethylsiloxane as a photothermal-responsive self-healing composite coating for smart corrosion protection

Mussel-inspired Self-assembly into Polymer Coatings of Different Molecular Weight Electrolytes for Enhanced Self-healing and Corrosion Properties

Photothermally activated self-healing coatings for corrosion protection: A review