Abstract:Research has been focused on the pointing control of the two-axis gimbal system (TGS) which plays a significant role in many different tasks. The pointing accuracy is one of the most concerning performance in practical application, which is, to a large extent, affected by the pointing controller design. Often, the three-loop (current-velocity-position) control scheme is applied to suppress the disturbance and point reference signal. In this paper, the PID type-III control loop is proposed for TGSs and the controller parameters tuning rules are given explicitly. Concretely, the friction compensation based on the LuGre model is carried out first to the velocity inner loop. A greater system rigidity is achieved for the position loop. Secondly, based on frequency domain modeling, the PID type-III control loop is designed according to the position-controlled plant, which is characterized by the presence of three integrators in the open-loop transfer function to achieve zero steady-state position, velocity and acceleration error. Then, considering the system design complexity and practical application, the explicit tuning rules of the PID type-III control loop are derived using magnitude optimum criterion. The parameters are finally designed by stability margin and error suppression ability, which is more appropriate for practical systems. Besides, a pre-filter is also added outside the closed-loop structure when set-point tracking is carried out. Finally, to justify verily the efficiency of the proposed control law, the simulations and experiments in a two-axis pod gimbal system are investigated. The dynamic and stationary performances compared with another type-III control loop method, indicating that the proposed tuning rules have higher positioning accuracy. (c) 2021 Elsevier B.V. All rights reserved.

Coupling Analysis and Feedforward Compensation Design of Two-axis Gimbal Controller

Robust Immersion and Invariance Adaptive Coordinated Control for a Class of Biaxial Gantry Systems

Dynamics Modeling and Stabilization Analysis of a Two-Axis Gimbaled System

Learning-Based Control Compensation for Multi-Axis Gimbal Systems Using Inverse and Forward Dynamics

Multivariable H∞ Control Method Applied to Electro-Optical Platform with Two-Axis Four-Gimbal Configuration

Two-axis Gimbal Platform Controller Design in Finite Time Application Occasions: LMI Approach

Dynamic Decoupling Control of DGCMG Gimbal System Via State Feedback Linearization

Feedback Stabilization of a Two-Axis Gimbal System Via Conservative Stability Analysis

Modeling and Control of a Two-Axis Stabilized Gimbal Based on Kane Method

Iterative Control Decoupling Tuning by Feedforward Compensation for Precision Motion Stage

Control System Design of Multi-Gimbal Electro-Optical Platform by the Technique of Mu-Synthesis

Composite Decoupling Control of Gimbal Servo System in Double-Gimbaled Variable Speed CMG Via Disturbance Observer

Feedback Stabilization of a Two-axis Gimbal System Via Convex Optimization

Dynamic Modeling and Coupling Analysis of a Multi-Gimbal Electro-Optical Platform

Dynamics Modeling and Theoretical Study of the Two-Axis Four-Gimbal Coarse–Fine Composite UAV Electro-Optical Pod

Feedforward coefficient identification and nonlinear composite feedback control with applications to 3-DOF planar motor

Gain Tuning Method of Closed-Loop-injection Low-Order Feedforward Controller Considering Axis Dynamics

Composite Velocity-Tracking Control for Flexible Gimbal System with Multi-Frequency-Band Disturbances

Dynamic Modeling and Coupling Characteristic Analysis of Two-Axis Rate Gyro Seeker

Pointing Control Design Based on the PID Type-Iii Control Loop for Two-Axis Gimbal Systems

Dynamics Modeling and Low Rate Control of Gimbal Servo System for Single Gimbal Control Moment Gyro