Abstract:Gaseous detonation propagation in a bifurcated tube was experimentally and numerically studied for stoichiometric hydrogen and oxygen mixtures diluted with argon. Pressure detection, smoked foil recording and schlieren visualization were used in the experiments. Numerical simulation was carried out at low initial pressure (8.00kPa), based on the reactive Navier–Stokes equations in conjunction with a detailed chemical reaction model. The results show that the detonation wave is strongly disturbed by the wall geometry of the bifurcated tube and undergoes a successive process of attenuation, failure, re-initiation and the transition from regular reflection to Mach reflection. Detonation failure is attributed to the rarefaction waves from the left-hand corner by decoupling leading shock and reaction zones. Re-initiation is induced by the inert leading shock reflection on the right-hand wall in the vertical branch. The branched wall geometry has only a local effect on the detonation propagation. In the horizontal branch, the disturbed detonation wave recovers to a self-sustaining one earlier than that in the vertical branch. A critical case was found in the experiments where the disturbed detonation wave can be recovered to be self-sustaining downstream of the horizontal branch, but fails in the vertical branch, as the initial pressure drops to 2.00kPa. Numerical simulation also shows that complex vortex structures can be observed during detonation diffraction. The reflected shock breaks the vortices into pieces and its interaction with the unreacted recirculation region induces an embedded jet. In the vertical branch, owing to the strength difference at any point and the effect of chemical reactions, the Mach stem cannot be approximated as an arc. This is different from the case in non-reactive steady flow. Generally, numerical simulation qualitatively reproduces detonation attenuation, failure, re-initiation and the transition from regular reflection to Mach reflection observed in experiments.

Experimental Observations of Gaseous Cellular Detonation Reflection

Investigation on the Dynamics of Shock Wave Generated by Detonation Reflection

Mach Reflection of Detonation Waves with Velocity Deficits

Detonation re-initiation mechanism following the Mach reflection of a quenched detonation

The critical conditions for the re-ignition and detonation formation from Mach reflections of curved decaying shocks

Detonation wave reflection over a concave–convex cylindrical wedge

Re-initiation Phenomenon of Gaseous Detonation Induced by Shock Reflection

Mach reflection of a H2-O2-Ar detonation wave on the rough wedge based on soot track measurements

Cellular pattern evolution in gaseous detonation diffraction in a 90°-branched channel

Mach Reflection of Detonation Waves over a Porous Concave Wedge

Numerical Investigation of Shock Wave Reflections Near the Head Ends of Rotating Detonation Engines

Reflection behavior of insensitive explosive detonation propagating around a cylinder

Transition Process of Mach Reflection for Premixed Mixtures with Different Stability

The Comparison between Diffraction of Air Shock Wave and Gaseous Detonation Wave in a 90° Branched Duct

Analysis on the radial structure of rotating detonation wave in a hollow combustor

Numerical and Experimental Analysis of Detonation Induced by Shock Wave Focusing

Gaseous Detonation Propagation in A Bifurcated Tube

Numerical Simulation of Detonation Initiation Induced by Shock Wave Reflection in a Rapid Compression Machine

Numerical Study on Critical Wedge Angle of Cellular Detonation Reflections

Numerical Simulation of Gaseous Detonation Waves Propagation and Comparison with Experimental Results

Three-dimensional simulations of detonation propagation in circular tubes: Effects of jet initiation and wall reflection