Abstract:Advances in Structural Engineering, Ahead of Print. Steel circular hollow section (CHS) members are widely utilized as axial force-resisting structural members in civil engineering structures. The buckling strength under axial loads is one of the critical parameters to determine the performance of the steel CHS members, which is significantly affected by the discreteness introduced by geometries, material, and initial imperfections. However, the reduction factor employed in the modern design codes (i.e. Chinese codes and EC3) only accounts for the reduction caused by all kinds of discreteness and does not reflect the impacts of every single discreteness and imperfection. To fill the gap, this paper proposed an interpretable machine-learning method to provide the probabilistic axial buckling strength of steel CHS members prediction result in a distribution form with the consideration of detailed discreteness. The model to predict the nominal axial buckling strength of steel CHS members was first developed utilizing ten machine learning algorithms after sufficient numerical simulations, where the numerical model was verified using test results. The artificial neural network (ANN) was selected for developing the prediction model due to its highly reliable performance in testing. The developed ANN models were further interpreted utilizing Shapley Additive exPlanations (SHAP) to determine the interrelationship of different parameters. Then, the probabilistic axial bucking strength prediction model was established based on the developed ANN models, where the Latin hypercube sampling method was applied to address the discreteness of geometries, material, and initial imperfections. The generated probabilistic axial bucking strength prediction model's effectiveness was verified by the evidence that the machine learning prediction results can highly match the numerical results' probability density function and the result from codes while significantly reducing the computation time. Finally, the design parameters' impact on the axial buckling strength's discreteness was evaluated using the global sensitivity analysis (GSA) method. The result shows that the discreteness of design parameters substantially influences the distribution of the axial buckling strength of the steel CHS members and the proposed prediction model can provide an accurate probabilistic distribution prediction.

Hybrid Machine Learning Models to Predict the Shear Strength of Discontinuities with Different Joint Wall Compressive Strength

Proposing an Inherently Interpretable Machine Learning Model for Shear Strength Prediction of Reinforced Concrete Beams with Stirrups

Novel Intelligent Approach for Peak Shear Strength Assessment of Rock Joints on the Basis of the Relevance Vector Machine

Prediction of Peak Shear Strength of Rock Joints Based on Back-Propagation Neural Network

Interpretable Machine-Learning Models for Maximum Displacements of RC Beams under Impact Loading Predictions

Prediction of Uniaxial Compressive Strength in Rocks Based on Extreme Learning Machine Improved with Metaheuristic Algorithm

Data-driven shear strength prediction of steel reinforced concrete composite shear wall

Machine learning based design of reinforced concrete shear walls subjected to earthquakes

Prediction of joint roughness coefficient via hybrid machine learning model combined with principal components analysis

A method to predict the peak shear strength of rock joints based on machine learning

Prediction and optimization framework of shear strength of reinforced concrete flanged shear wall based on machine learning and non-dominated sorting genetic algorithm-II

Shear Performance Prediction for Corrugated Steel Web Girders Based on Machine-learning Algorithms

Prediction and reliability analysis of shear strength of RC deep beams

Predicting the shear strength of concrete beam through ANFIS-GA–PSO hybrid modeling

Machine Learning Algorithms for Prediction and Characterization of Cohesive Zone Parameters for Mixed-Mode Fracture

Fusion of finite element and machine learning methods to predict rock shear strength parameters

Determination of the shear failure areas of rock joints using a laser scanning technique and artificial intelligence algorithms

Interpretable machine learning models for predicting probabilistic axial buckling strength of steel circular hollow section members considering discreteness of geometries and material

Splitting tensile strength prediction of sustainable high-performance concrete using machine learning techniques

Supervised intelligent prediction of shear strength of rockfill materials based on data driven and a case study

Rock strength prediction based on machine learning: A study from prediction model to mechanism explanation