Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Side Chain Regioregularity Enables High-Performance and Sustainable Organic Electrochemical Transistors

High Electrical Conductivity and Carrier Mobility in Ocvd PEDOT Thin Films by Engineered Crystallization and Acid Treatment

Vertical Organic Electrochemical Transistors for Complementary Circuits

Ac Electrodeposition Of Pedot Films In Protic Ionic Liquids For Long-Term Stable Organic Electrochemical Transistors

Asymmetric side-chain engineering of conjugated polymers with improved performance and stability in organic electrochemical transistors

Molecular design strategies for high‐performance organic electrochemical transistors

Strategically tailoring ethylene glycol side chains with bridged-carbonyl ester in polythiophene-based organic electrochemical transistors for bioelectronics

Editorial: High-Performance Organic Thin-Film Transistors

Green Synthesis of Lactone‐Based Conjugated Polymers for n‐Type Organic Electrochemical Transistors

Porous Semiconducting Polymers Enable High‐Performance Electrochemical Transistors

Balancing Electroactive Backbone and Oligo(Ethylene Oxy) Side‐Chain Content Improves Stability and Performance of Soluble PEDOT Copolymers in Organic Electrochemical Transistors

Small-Molecule Mixed Ionic-Electronic Conductors for Efficient N-Type Electrochemical Transistors: Structure-Function Correlations

Facilely Accessible Porous Conjugated Polymers toward High-Performance and Flexible Organic Electrochemical Transistors

Tailoring the Density of State of n-Type Conjugated Polymers through Solvent Engineering for Organic Electrochemical Transistors

Amphiphilic Interface-Mediated Ion Doping for High Performance Organic Electrochemical Transistors with Hydrophobic Polymers

Insight into conjugated polymers for organic electrochemical transistors

Improved Organic Electrochemical Transistors via Directed Crystallizable Small Molecule Templating

High Performance Organic Mixed Ionic‐electronic Polymeric Conductor with Stability to Autoclave Sterilization

The Effect of Organic Semiconductor Electron Affinity on Preventing Parasitic Oxidation Reactions Limiting Performance of n‐Type Organic Electrochemical Transistors

Vertical organic electrochemical transistor platforms for efficient electropolymerization of thiophene based oligomers

Organic Mixed Ionic Electronic Conductor Nanochannels for Vertical Electrochemical and Ionic Transistors