Abstract:Dependence of the tribological behaviors of polyimide‐ and polyetheretherketone‐based composites on pv (pressure × speed) factors is investigated in air ambience. It is demonstrated that the hybrid composites filled with nanosilica/carbon fibers/graphite exhibit ultralow friction and wear under extreme conditions. In particular, the friction coefficients of the hybrid nanocomposites at 40 MPa m s−1 are in the range of 0.03–0.04, which are even lower than those obtained with poly alpha olefin lubrication. Moreover, the friction coefficients are lower than those of carbon fibers reinforced polymer composites ever reported in literatures. In order to reveal the underlying mechanisms of ultralow friction and wear, tribochemistry and tribofilms' nanostructures are comprehensively analyzed. It is identified that chelation of polymeric molecular radicals with steel counterface occurs enhancing tribofilm's bonding strength. Striking orientation of the molecules of remnant polymer in tribofilm is indicative that the film exhibits an easy‐to‐shear characteristic under extreme pv conditions. Nanosilica released onto sliding interface and iron oxide particles abraded from the counterface are thereafter tribosintered into a compact layer, which accounts for the high load‐carrying capability of the tribofilm. Chelation of polymeric molecular radicals with steel counterface enhances tribofilm's bonding strength. Mechanical mixing of various wear products leads to the formation of the silica‐based tribofilm, which allows for a high load‐carrying capability of this tribofilm. High orientation of the molecules of remnant polymer in tribofilm is indicative that the film exhibits an easy‐to‐shear characteristic under extreme pv conditions.

High-strength, Flexible and Self-Lubricating Wood-Plastic Composites Based on Synergistic Reinforcement of "Hard-Soft" Units

Improved wear resistance and recycling of carbon fiber/epoxy composites via incorporation of regenerated lignin cellulose

MXene/PFW bionic "sandwich" structure enables functional self-lubricating of wood-based composites

Enhancing the Tribological Properties of Low-Density Polyethylene Using Hard Carbon Microfillers

Self-Lubrication Mechanism of Surface-Textured Polymer-Matrix Composites under the Induction of Frictional Stress

Synergistic reinforcement of polylactic acid/wood fiber composites by cellulase and reactive extrusion

Carbon fiber/nano SiO 2 reinforced polyelectrolyte-graft UHMWPE for water lubricated superlubricity

Carbon Fiber/nano SiO2 Reinforced Polyelectrolyte-Graft UHMWPE for Water Lubricated Superlubricity

Mussel-inspired Polydopamine Functionalized PBO Fibers As an Efficient Additive for UHMWPE Composites with Improved Tribological Performance

Sustainable, recyclable, and highly wear-resistant wood matrix as a new paper-based friction material

Synergetic Enhancement of Wear Resistance of Polyimide Coatings through the Integration of MoS 2 Nanoflowers and MXene Nanosheets

Synthesis of Core-Shell PFPE@SiO2 Nanocapsules and Their Self-Lubrication Effect in Phenol-Formaldehyde Resin

Simultaneously enhancing tribological and mechanical properties of epoxy composites using basalt fiber/reduced graphene oxide/paraffin wax

Synthesis melamine-formaldehyde microcapsules containing paraffin to improve the tribological properties of self-lubricating fabric liner composites

Tribological performances of epoxy resin reinforced by a novel biomass intelligent "pool-channel" oil storage and delivery system

Synergistically improving interface behavior by designing physical twisting structure and "rigid-flexible" interface layer on ultra-high molecular weight polyethylene (UHMWPE) fiber surface

Ultralow Friction and Wear of Polymer Composites under Extreme Unlubricated Sliding Conditions

Solvent effect of microcapsules endows self-lubricating polymer composites with wear in-situ self-healing function

A Strategy to Improve Tribological Performances of Solvent-Based Phenol−formaldehyde Resin by Using Oil-Containing Nanocapsules

Optimizing the rheological and mechanical properties of ultra-highly filled wood fiber/polyethylene composites through binary alloy matrix strategy

Sustainable Engineering Polymer Composites Fabricated Using Delignified Bamboo Fiber as Reinforcement and Walnut Shell Powder as Filler