Abstract:This work investigates the possibility of using LaMn0.7Fe0.3O3.15@mSiO(2) as oxygen carriers for chemical looping combustion (CLC). CLC is a new combustion technique with inherent separation of CO, from atmospheric N-2. LaMn0.7Fe0.3O3.15@mSiO(2) core shell materials were prepared by coating a layer of mesostructured silica around the agglomerated perovskite particles. The oxygen carriers were characterized using different methods, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N-2 sorption, hydrogen temperature-programmed reduction (H-2-TPR), and temperature-programmed desorption of oxygen (TPD-O-2). The reactivity and stability of the carrier materials were tested in a special reactor, allowing for short contact time between the fluidized carrier and the reactive gas [Chemical Reactor Engineering Centre (CREC) fluidized riser simulator]. Multiple reduction oxidation cycles were performed. TEM images of the carriers showed that a perfect mesoporous silica layer was formed around samples with 4, 32, and 55 nm in thickness. The oxygen carriers having a core shell structure showed higher reactivity and stability during 10 repeated redox cycles compared to the LaMn0.7Fe0.3O3.15 core. This could be due to a protective role of the silica shell against sintering of the particles during repeated cycles under CLC conditions. The agglomeration of the particles, which occurred at high temperatures during CLC cycles, is more controllable in the core shell-structured carriers, as confirmed by SEM images. XRD patterns confirmed that the crystal structure of all perovskites remained unchanged after multiple redox cycles. Methane conversion and partial conversion to CO, were observed to increase with the contact time between methane and the carrier. Indeed, more oxygen from the carrier surface, grain boundaries, and even from the bulk lattice was released to react with methane. Upon rising the contact time, less CO was formed, which is desirable for CLC application. Increasing the reaction temperature and methane partial pressure lead to enhanced conversions of CH4 under CLC conditions.

Theoretical Insights into the Size Effect of Α-Fe2o3 Oxygen Carrier on Chemical Looping Reforming of Methane

Dopant-Enhanced harmonization of α-Fe 2 O 3 oxygen migration and surface catalytic reactions during chemical looping reforming of methane

Pressure‐Induced Enhancement in Chemical Looping Reforming of CH4 : A Thermodynamic Analysis with Fe‐Based Oxygen Carriers

Unraveling the Structure–Reactivity Relationship of CuFe2O4 Oxygen Carriers for Chemical Looping Combustion: A DFT Study

Performance and Kinetics of Iron-Based Oxygen Carriers Reduced by Carbon Monoxide for Chemical Looping Combustion

Microscopic insights into the reaction mechanism of Fe-based oxygen carrier with CH 4 in chemical-looping combustion

Review on the Theoretical Understanding of Oxygen Carrier Development for Chemical-Looping Technologies

Chemical looping reforming of biomass based pyrolysis gas coupling with chemical looping hydrogen by using Fe/Ni/Al oxygen carriers derived from LDH precursors

Driving Towards Highly Selective and Coking‐Resistant Natural Gas Reforming Through a Hybrid Oxygen Carrier Design

Oxygen Species Involved in Complete Oxidation of CH4 by SrFeO3-δ in Chemical Looping Reforming of Methane

Interaction Between Fe-based Oxygen Carriers and N-Heptane During Chemical Looping Combustion

Uniformly dispersed NiFeAlO 4 as oxygen carrier for chemical looping steam methane reforming to produce syngas

Understanding the structural changes on Fe2O3/Al2O3 oxygen carriers under chemical looping gasification conditions

Nanoscale structural transformations in LaFeO 3 oxygen carriers for enhanced reactivity in chemical looping combustion

From lab to industry: Scaling-up Fe-Ni bimetallic nano oxygen carrier for mid-temperature methane chemical looping reforming

New Insight into the Development of Oxygen Carrier Materials for Chemical Looping Systems

Activation Mechanism of Fe2O3-Al2O3 Oxygen Carrier in Chemical Looping Combustion

Chemical-Looping Combustion with Iron-Based Oxygen Carries

Development of Sinter-Resistant Core–Shell LaMnxFe1–xO3@mSiO2 Oxygen Carriers for Chemical Looping Combustion

Experimental Investigation of Fe–Ni–Al Oxygen Carrier Derived from Hydrotalcite-like Precursors for the Chemical Looping Gasification of Biomass Char

The use of iron oxide as an oxygen carrier in chemical-looping combustion of methane with inherent separation of CO2