Abstract:Although doped barium zirconate (BZY) has emerged as one of the best ceramic proton conductors its poor densification requires the use of sintering additives. Such additives, however, commonly deplete its bulk conductivity due to their accommodation into the bulk composition. In this work, we attempt to manipulate Ni sintering additive incorporation by modification of sintering profile. The impact of One‐step and Two‐step sintering on Ni‐incorporation and, thus, on subsequent levels of bulk, specific grain boundary conductivity and hydration are discussed. Summary Liquid phase sintering (LPS), by the addition of transition metal additives, has become one of the most preferred approaches to lower the sintering temperature of yttrium‐doped barium zirconate (BZY) proton‐conducting ceramics. Nonetheless, this approach is known to negatively impact the bulk conductivity of the parent perovskite phase, due to the significant incorporation of the sintering additive into the bulk composition. In the current work, we study the typical proton conducting material BaZr0.8Y0.2O3−δ (BZY20), prepared by One or Two‐step sintering strategies using 4 mol% NiO of sintering additive, compared against a control sample of pure BZY20. The main results demonstrate that the Two‐step approach is shown to minimise Ni interreaction with the BZY material, allowing this sample to maintain a higher hydration capacity than the One‐step material, as confirmed by X‐ray diffraction (XRD), scanning transmission electron microscopy/energy‐dispersive spectrocopy (STEM/EDS) and thermogravimetric (TG) measurements. Despite these benefits, the Two‐step approach presents a diminished bulk conductivity, which was ascribed to depletions in proton mobility due to "proton trapping" effects. In addition, the specific grain boundary conductivity was revealed to be higher in the Two‐step sample, as a possible result of a higher Ni accumulation in this region. Overall, this work opens an exciting new debate for further studies, in that prevention of Ni‐incorporation in the bulk material, as typically suggested in current literature, may not actually be the best method to improve the conductivity of samples densified by Ni‐additives and that control of potential defect associations may be the more critical method for conductivity tailoring.

Controlling grain boundary segregation to tune the conductivity of ceramic proton conductors

A comprehensive investigation of Li-ion conductivity in lithium hydroxy halide antiperovskite solid electrolytes

Highly conductive grain boundaries in cold-sintered barium zirconate-based proton conductors

Improving Proton Conductivity by Navigating Proton Trapping in High Scandium-Doped Barium Zirconate Electrolytes

Grain-boundary-dependent segregation and phase separation in ceria-zirconia from atomistic simulation

Mechanistic insights into proton diffusion in Σ3 BaZrO3 (210)[001] tilt grain boundary

Thermochemical Expansion and Protonic and Electronic Hole Conductivity of Grain Interior and Grain Boundaries in 10 Mole% Y-Substituted SrZrO3

Grain boundary segregation and phase separation in ceria-zirconia from atomistic simulation

Characterization of high Zr/Ce ratio Ba(Zr, Ce, Y)O3-δ proton conductors: investigating the impact of Y on materials properties

Mn Additive Improves Zr Grain Boundary Diffusion for Sintering of a Y-Doped BaZrO 3 Proton Conductor

Influence of grain boundary plane distribution on ionic conductivity in yttria-stabilized zirconia sintered at elevated temperatures

Cooperative Origin of Proton Pair Diffusivity in Yttrium Substituted Barium Zirconate

Proton diffusivity in spark plasma sintered BaCe0.8Y 0.2O3 - δ: In-situ combination of quasi-elastic neutron scattering and impedance spectroscopy

2D Doping of Proton Conductors: BaZrO 3 ‐Based Heterostructures

Ab initio prediction of charged species distribution at grain boundaries: Effects of structure and dopants

Pressure-induced Negative Capacitance and Enhanced Grain Boundary Conductivity in Nanocrystalline Solid Electrolyte BaZrO3

Tailoring the properties of dense yttrium‐doped barium zirconate ceramics with nickel oxide additives by manipulation of the sintering profile

Grain-boundary effect in zirconia stabilized with yttria and calcia by electrical measurements

Pressure-induced negative capacitance and enhanced grain boundary conductivity in nanocrystalline solid electrolyte BaZrO 3

Multi-scale simulation of proton diffusion in dislocation cores in BaZrO3

A New Composite Proton Conductor As a High-Performance Electrolyte Toward Low-Temperature Protonic Ceramic Cells