Abstract:Scour of pile group foundations is a common hazard for cross-river bridges and can produce considerable damage to piles in earthquake-prone regions. The fragility-based performance assessment for pile group supported bridges subjected to earthquake and scour hazards has drawn increasing attention from engineering practice and academic communities. Such assessment requires numerical models that are computationally efficient and accurate in describing the mechanical behavior associated with the complex soil-pile interaction of these soil-bridge systems. Additionally, selecting an optimal ground motion intensity measure (IM) is generally required for such assessments. However, modeling the pile group effect for seismically excited pile groups and the optimal IM for the scoured bridges have not been well addressed in previous related studies. To this end, a practical pile group effect modeling approach is adopted in this study and validated by a set of shake table tests on scoured pile group bridge available in the literature. Based on the validated numerical modeling approach for the soil pile interaction, a series of coupled soil-bridge models are generated considering the structural and soil parameter uncertainty and analyzed in the OpenSees platform. The optimal IM for various engineering demand parameters (EDPs) is identified from thirty-nine scalar IM candidates through the criteria of efficiency, practicality, sufficiency, and hazard computability. Finally, a straightforward form of probabilistic seismic demand model (PSDM), incorporating the effect of scour depth changes, is developed for pile group supported bridges. Results show that the increase of scour depth significantly increases the curvature demand of a pile group and statistically reduces the embedded depth of the belowground plastic hinge of the pile shaft. The rank of optimal IM candidates directly depends on the selection criteria of an optimal IM and the selection of EDP. In addition, the scour depth slightly affects the rank of optimal IMs. Generally, VSI , PGV, and S v ,1.0 are recommended for the probabilistic seismic demand analysis of pile group supported bridges in sandy soils with scour potentials.

Dimensional and Orientational Analysis of Seismic Responses of Single-Column Rocking Piers under Near-Fault Pulse-Like Ground Motions

Seismic Response of Isolated Railway Bridge Subjected to Near-fault Ground Motion

Seismic Response of Rigid Frame Bridge Subjected to Near-Fault Ground Motion with Effect of Axial Force Variation of Pier

Hysteretic Model for Steel Piers Considering the Local Buckling of Steel Plates

Research on the Multi-Shear Spring Model for Circular-Section Steel Piers

Stochastic seismic responses analysis of long-span rigid-framed bridge with high piers considering travelling wave effect

Analysis and Verification of Load–Deformation Response for Rocking Self-Centering Bridge Piers

Numerical Analysis of Dynamic Response of Large-Diameter Rock-Socketed Monopiles under Seismic Loads

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Seismic Analysis of Long Span Continuous Rigid-Frame Bridge with Thin-Walled High Piers

Refined Probabilistic Seismic Demand Modeling of High-Speed Railway Bridge Under Near-Fault Hanging-Wall Effects and Velocity Pulse Effects by a Novel Ground Motion Selection Approach

Seismic response analysis of the precast double-deck rocking frame bridge pier system

Nonlinear seismic response and damage analysis for continuous prestressed concrete rigid-frame bridge considering internal force state under near-fault ground motions

Residual displacement responses of RC bridge columns with degradation and pinching effect under near-fault pulsed ground motions

Probabilistic seismic demand model of UBPRC columns conditioned on Pulse-Structure parameters

A finite element model for seismic response analysis of deformable rocking frames

Seismic Response Analysis for Pier in Considering of Uplift Effect

Seismic response of a Reduced-scale continuous girder bridge with rocking Columns: Experiment and analysis

Seismic response of rocking frames with top support eccentricity

3D response simulation of a bridge with a posttensioned base rocking steel pier under sequential loading of traffic loads, braking force, and earthquake excitations

Optimal intensity measure selection and probabilistic seismic demand model of pile group supported bridges in sandy soil considering variable scour effects