Abstract:The ambient temperature has a great influence on the practical application of the supercritical carbon dioxide(S-CO2) Brayton cycle. The introduction of mixtures is an effective way to change the critical characteristics of the working fluid, which allows the system to better match the ambient temperature. The mixtures not only affect the overall performance of the power system, but also affect the flow and heat transfer processes in various heat exchange equipment. In this investigation, the physical model of a sinusoidal wavy channel printed circuit heat exchangers (PCHE) is built, and numerical simulations are conducted firstly on the flow and heat transfer characteristics of three S-CO2 mixtures (CO2-He, CO2-Ke and CO2-Xe). Effects of the mole fraction and type of the additive gasses on the thermal-hydraulic performance are discussed, as well as the variations of the local heat transfer coefficients and pressure drop along the flow direction. It's found that transfer coefficient and pressure drop of CO2-He increase with the increase of the additive gas mole fraction n, with maximum heat increases of 396 % and 1147 % against pure S-CO2, respectively. With the increase of n, heat transfer coefficient and pressure drop of CO2-Kr and CO2-Xe decrease. Maximum decreases of 71 % and 38 % can be seen for the heat transfer coefficient and pressure drop against pure CO2 for CO2-Kr, and 80 % and 64 % against pure CO2 for CO2-Xe, respectively. CO2-Xe yields the best thermal-hydraulic performance of the PCHE among the three mixtures. Secondly, machine learning is adopted to predict the local flow and heat transfer characteristics of S-CO2 mixtures in response to the significant variation of S-CO2 mixtures along the flow direction within the PCHE. Four machine learning models including Support vector machine (SVR), Artificial neural network (ANN), Random forest (RF) and Extreme Boosting Tree (XGBoost) are used and the corresponding prediction performance are analysed. It is found that machine learning is efficient and accurate in the prediction. Among the four machine learning models, XGBoost has a strong fitting ability to the local Nu and f, with an R 2 of 0.9992 and 0.9718 on the test set, respectively. The prediction results of the XGBoost model can reflect the variations of local Nusselt number and friction factor along the flow direction well. However, ANN has stronger generalization ability in the prediction under new working conditions. The use of machine learning can greatly help the design and optimization of PCHEs with S-CO2 mixtures as working fluids.

Research on Fine Analysis and Accelerated Prediction Technology for Thermal Stratification in the Upper Plenum of the “monju” Reactor

Accelerated Computational Strategies for Multi-Scale Thermal Runaway Prediction Models in Li-ion Battery

Machine Learning Strategy for Wall Heat Flux Prediction in Aerodynamic Heating

Heat Flux Prediction of Radiation Balance Wall by Deep Convolutional Neural Networks

Data-driven Nonlinear Constitutive Relations for Rarefied Flow Computations

Uncertainty Quantification of the Superposition Film Cooling with Trench Using Supervised Machine Learning

Development of a Data-driven Turbulence Model for 3d Thermal Stratification Simulation during Reactor Transients

On the prediction of critical heat flux using a physics-informed machine learning-aided framework

Data-Driven Modeling of Coarse Mesh Turbulence for Reactor Transient Analysis Using Convolutional Recurrent Neural Networks

A Predictive Model Of Solid Oxide Fuel Cell Stacks For Thermal Mangement

A practical methodology devoted to pool‐type phenomena simulation in safety analysis for sodium‐cooled fast reactor

A machine-learning-aided data recovery approach for predicting multi-material thermal behaviors in advanced test reactor capsules

A two-level machine learning approach for predicting thermal striping in T-junctions with upstream elbow

Prediction method for thermal-hydraulic parameters of nuclear reactor system based on deep learning algorithm

Prediction model of the outflow temperature from stratified reservoir regulated by stratified water intake facility based on machine learning algorithm

A Novel Data-Driven Reduced-Order Model for the Real-Time Prediction of Gas-Solid Heat Transfer in Fluidized Beds

Machine learning and prediction study on heat transfer of supercritical CO 2 in pseudo-critical zone

Machine Learning Prediction of Critical Heat Flux on Downward Facing Surfaces

Numerical study and machine learning on local flow and heat transfer characteristics of supercritical carbon dioxide mixtures in a sinusoidal wavy channel PCHE

Extra trees regression assisted 1D monolith reactor simulations based on microkinetic analysis and rate transformation

Prediction of Flow and Temperature Distributions in a High Flux Research Reactor Using the Porous Media Approach