Abstract:The membrane immobilization of imprinted photocatalysts is a good cooperative model, which not only gives self-cleaning and selectivity to the membrane but also solves the problem of difficult recycling and reuse of powder catalysts. Nevertheless, the problem of catalyst encapsulation and pore blockage limits its practical application. Herein, 1-methyl-2-pyrrolidone (NMP)-induced surface self-corrosion-assisted rapid spin-coating method was first proposed to prepare imprinted perylene diimide/poly-3,4-ethylenedioxythiophene heterojunction photocatalyst anchored membrane (I-PDI/PEDOT-M) with high stability and permeability. NMP can corrode polyvinylidene fluoride (PVDF) membrane and cause pore wall collapse on PVDF surface. The collapse of the pore wall firmly anchored the imprinted PDI/PEDOT heterojunction photocatalyst (I-PDI/PEDOT) into the surface pore of the PVDF membrane, effectively enhancing the stability. More importantly, this method did not produce a dense layer of traditional spin-coating solution, and I-PDI/PEDOT was fully exposed in the surface pores of the membrane to contact pollutants, thus maintaining high water flux and photodegradation activity. Besides, the construction of heterojunction structure and the introduction of imprinted cavities resulted in the good self-cleaning performance, excellent photocatalytic performance and significant specific degradation ability of I-PDI/PEDOT-M. The degradation activity of tetracycline (TC) with I-PDI/PEDOT-M was 11.05 times that of ciprofloxacin, and the selectivity coefficients of I-PDI/PEDOT-M were 2.51and 1.63 relative to PDI-M and non-imprinted PDI/PEDOT heterojunction photocatalyst, respectively. Additionally, the theoretical calculation and toxicity experiment proved that the toxicity was significantly reduced after degrading TC by I-PDI/PEDOT-M. This work provides an interesting idea for the design of highly stable and permeable photocatalytic membrane and highly selective degradation of specific pollutant.

Fabrication of the TiO2/Ti3C2 Loaded Ceramic Membrane Targeting for Photocatalytic Degradation of PPCPs: Ciprofloxacin, Tetracycline, and Ibuprofen

Study on photocatalytic degradation and antibacterial properties of conjugated microporous polymers/TiO 2 composite membranes

Study on Photocatalytic Degradation and Antibacterial Properties of Conjugated Microporous Polymers/tio2 Composite Membranes

Nature-mimicking Fabrication of Antifouling Photocatalytic Membrane Based on Ti/BiOI and Polydopamine for Synergistically Enhanced Photocatalytic Degradation of Tetracycline

Efficient degradation of tetracycline by activated peroxymonosulfate with high permeate flux FeTiO x reactive ceramic membrane: Membrane preparation, real wastewater application, and mechanism insight

Oxygen Vacancy Mediated Photocatalysis of Ti3C2 MXene Quantum Dots/w18o49 Hybrid Membrane for Peroxymonosulfate-Enhanced Oxidation Degradation

Zr-doped TiO2 ceramic nanofibrous membranes for enhancing photocatalytic organic pollutants degradation and antibacterial activity

Photocatalytic Degradation of Amoxicillin Via TiO2 Nanoparticle Coupling with a Novel Submerged Porous Ceramic Membrane Reactor

CNTs–TiO2/Al2O3 Composite Membrane with a Photocatalytic Function: Fabrication and Energetic Performance in Water Treatment

Removal of tetracycline by a photocatalytic membrane reactor with MIL-53(Fe)/PVDF mixed-matrix membrane

In-situ Immobilization of Titanium Dioxide on Poly (ether Ether Ketone) Hollow Fiber Membranes and the Effect of Ph Level on the Photo-Removal Process of Dyes

Structurally optimized MXene-based photocatalytic membrane to achieve self-cleaning properties and enhanced removal for small molecule from wastewater

Removal of Tetracycline Hydrochloride by Photocatalysis Using Electrospun PAN Nanofibrous Membranes Coated with g-C3N4/Ti3C2/Ag3PO4

Hydrodynamic Cavitation-Enhanced Photocatalytic Activity of P-Doped TiO2 for Degradation of Ciprofloxacin: Synergetic Effect and Mechanism

Photocatalytic Self-Cleaning NaTaO3@Ti3C2Tx MXene Membranes for Efficient Antibiotics Removal

Integrated flexible photocatalytic composite nanofiber membranes combined in-situ grown CQDs/g-C 3 N 4 with thermally etched porous silica

Hydrophilic, Self-Cleaning, and Recyclable La-TiO2/PAN 2 /PAN Nanofibrous Membranes Rapidly Fabricated Via Electro-Centrifugal Spinning for Photocatalytic Organic Pollutants

NMP-induced surface self-corrosion-assisted rapid spin-coating method for synthesizing imprinted heterojunction photocatalyst anchored membrane towards high-efficiency selective degradation tetracycline

A Multifunctional Membrane Based on TiO2/PCN-224 Heterojunction with Synergistic Photocatalytic-Photothermal Activity under Visible-Light Irradiation

Fabrication of Photocatalytic Membrane and Evaluation Its Efficiency in Removal of Organic Pollutants from Water

Bimetallic Au/Ag Decorated TiO2 Nanocomposite Membrane for Enhanced Photocatalytic Degradation of Tetracycline and Bactericidal Efficiency