Abstract:Water energy is a clean, green, and renewable energy. Phase change material (PCM) has great potential for energy storage and energy saving applications. Utilizing the river water flow to charge the energy into PCMbased latent heat storage (LHS) unit is a new attempt for energy storage. To analyze the feasibility of this novel energy storage method, a coupling model of the PCM-based LHS unit and river water flow was developed in this study. Then, the thermal performance of the PCM-based LHS unit within the river water under different working conditions were investigated. The results show that the proposed energy storage method is feasible. Modifying the geometry sizes (GS) of the unit can affect the liquid fraction and full solidification time variations of the unit. GS-4 with 15 cm x 60 cm is an optimum geometry size of the unit in the current study. A higher water flow inlet velocity can accelerate the reductions of the liquid fraction and PCM temperature. The full solidification time reduces by 13.6 % as the water flow inlet velocity rises from 0.02 to 2 m/s. Arranging fins inside the PCM-based LHS unit is an effective method to enhance the heat transfer behavior of the unit within the river water. The solidification enhancement ratio can reach 77.3 % when the number of fins rises from 0 to 7. For the same total volume of fins, the unit with thin and closely spaced fins (i.e., layout-2 fins) shows highest solidification efficiency. Moreover, thin and closely spaced fins has more superiority for the solidification performance enhancement compared with thick and widely spaced fins. The full solidification time of the unit with layout-2 fins saves by 84.8 % when the water flow temperature ( T w ) reduces by 12 degrees C. For units without fins and with layout-2 fins, the solidification time decreases exponentially with increasing temperature difference between T w and PCM melting temperature.

Heat Transfer Performance Analysis of Phase Change Material-Based Latent Heat Storage Unit Based on River Water Source

Transient Performance of a Thermal Energy Storage-Based Heat Sink Using a Liquid Metal As the Phase Change Material

STUDY ON CHARGING AND DISCHARGING RATES OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS EMPLOYING MULTIPLE PHASE CHANGE MATERIALS

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Improving the melting performance of phase change material (PCM) in a latent heat thermal energy storage unit via a non-uniform arrangement of longitudinal fin

Performance Evaluation and Analysis of a Vertical Heat Pipe Latent Thermal Energy Storage System with Fins-Copper Foam Combination

Experimental and Modeling Study on Thermal Performance of Hydrated Salt Latent Heat Thermal Energy Storage System

Performance Investigation on an Air Source Heat Pump System with Latent Heat Thermal Energy Storage

Experimental Study on a Pilot-Scale Medium-Temperature Latent Heat Storage System with Various Fins

Analyzing competing effects between heat transfer area and natural convection to enhance heat transfer in latent heat storage

Thermal performance analysis and enhancement of the multi-tube latent heat storage (MTLHS) unit

An experimental investigation on the heat transfer characteristics of cascaded thermal storage units based on multichannel flat tubes

Study on thermal performance improvement technology of latent heat thermal energy storage for building heating

Numerical Simulation of Thermal Performance and Thermal Stress of Latent Heat Storage System with Various Fins

Experimental and numerical study on thermal performance and inlet and outlet structure optimization of phase change heat storage tank

The Thermal Stratification Evaluation of Phase-Change Materials in a Heat Storage Tank: Computational Fluid Dynamics and Experimental Study

Comprehensive performance analysis and structural improvement of latent heat thermal energy storage (LHTES) unit using a novel parallel enthalpy-based lattice Boltzmann model

On the performance of a latent heat thermal storage unit integrated with a helically coiled copper tube and organic phase change materials: A lab-scale experimental study

Performance improvement of phase change material (PCM)-based shell-and-tube-type latent heat energy storage system utilizing curved fins

A Review on Heat Transfer Enhancement of Phase Change Materials Using Fin Tubes