Abstract:When the RLV reaches the TAEM interface, the large-scale perturbation exists in initial position and azimuth angle states. A rapid trajectory planning method based on iterative correction algorithm has been proposed, to ensure that the RLV can get into the approach and landing interface successfully. According to the RLV ' s specific initial states, the method can select the direct or overhead heading alignment cone ( HAC ) mode automatically, and can generate a feasible reference profile quickly. First, the reference dynamic pressure-height profile can be generated based on the height and velocity constraints. Tracking the dynamic pressure-height profile is employed as the longitudinal guidance law, whereas tracking the ground track is used as the lateral guidance law. The longitudinal and lateral guidance laws ensure that the speed, flight path angle, azimuth angle, and lateral position of the RLV meet the terminal constraints. The ground track is composed by piecing together several flight segments that are defined by three geometric parameters. Two of the parameters, the position of HAC and its final radius, are determined by the iterative correction algorithm rapidly, until all of the required conditions for approach and landing interface are met. Simulation shows that the algorithm can select the direct or overhead heading alignment cone ( HAC) mode automatically, and can generate a feasible reference profile quickly according to the RLV' s specific initial states. The profile generation time are 4 to 12 seconds. The numerical methods used by the proposed algorithm are very mature and stable, and very easy to be realized in engineering. Compared with the strategy of the space shuttle, the algorithm does not rely on a number of reference trajectories that are calculated and stored offline, and the algorithm can a new reference trajectory autonomously according to the specific states. Simulation results have demonstrated the rapidity, robustness and practicability of the trajectory planning algorithm.

Rapid and Near-Analytical Planning Method for Entry Trajectory under Time and Full-State Constraints

Rapid Longitudinal Trajectory Planning For Rlvs In The Terminal Area

A Rapid Iterative Trajectory Planning Method for Automated Parking Through Differential Flatness

Rapid Constrained Trajectory Planning for Entry Vehicles

Entry Trajectory Generation Without Reversal of Bank Angle

Highly constrained entry trajectory generation

Rapid Generation of Multi-Target Entry Trajectory for Hypersonic Glide Vehicles

Rapid Generation of Entry Trajectory with Multiple No-Fly Zone Constraints

Entry trajectory planning based on three-dimensional acceleration profile guidance

Entry Trajectory Planning with Terminal Full States Constraints and Multiple Geographic Constraints

A rapid TAEM trajectory planner based on iterative correction algorithm

Rapid Generation of Entry Trajectories with Waypoint and No-Fly Zone Constraints

A reentry trajectory planning approach satisfying waypoint and no-fly zone constraints

Onboard Planning of Constrained Longitudinal Trajectory for Reusable Launch Vehicles in Terminal Area

Reentry trajectory planning based on genetic optimization of terminal matching.

Application Of Neural Network In Trajectory Planning Of The Entry Vehicle For Variable Targets

Lateral-profile planning: Three-dimensional-profile-based optimal trajectory generation

Entry Trajectory Generation Based on Quasi-Three-dimensional Acceleration Guidance

General Reentry Trajectory Planning Method Based on Improved Maneuver Coefficient

On-board entry guidance satisfying waypoint and no-fly zone constraints

A Three-Dimensional Predictor–corrector Entry Guidance Based on Reduced-Order Motion Equations