Abstract:A four-cable mount system is proposed for full-model wind tunnel flutter tests, which may adjust the pitch and roll attitude of the aircraft scaled model and ensure that the model is not subjected to cable tension. The system provides sufficient support to simulate the free flight of the aircraft by applying appropriate spring stiffness and cable tensions. The proposed four-cable mount system is modeled based on Lagrange mechanics, and its dynamics equations consider aerodynamic effects. The singularity of the system and its bifurcation characteristics under flow conditions are analysed to determine the supercritical bifurcation phenomenon for different tension levels and distances from the front suspension point to the mass centre of the model. The mathematical expressions of the longitudinal flight stability of the cable mount system are derived by linearising the system dynamics equations using small perturbations. The influence of the cable tension, spring stiffness, suspension point position, and other factors on the flight stability of the aircraft are analysed. A feedforward control algorithm is proposed to minimize the total elastic potential energy of the system. The results show that the model is in the level flight state when the elastic potential energy of the four-cable mount system is minimized. A feedback control design method is proposed based on the Lyapunov stability theory to derive the closed-loop stability conditions. The system dynamics model that includes the aircraft rigid body model, flexible cables, pulleys, springs, aerodynamic model, and servo motor control is established using the flexible multibody dynamics method. A multibody dynamics solver and Simulink are used to simulate the attitude adjustment of the model in the wind tunnel and verify the supercritical bifurcation characteristics of the system and the effectiveness of the feedback and feedforward control.

Research on Dynamic Control Model of Multi-Scenario Synchronization in Aircraft Suspension Lifting System

Lifting Synchronization Control for Interconnected Hydro-pneumatic Suspension

Modeling and H∞ Position Control of a Spreader in the Gantry Crane

Dynamics modeling and performance verification of the mechanical flight control system on transport airplane

Dynamic Modeling and Oscillation Control of Industrial Cranes Transporting Upright Slender Flexible Payloads

An Anti-Swing Controller for Aerial Transportation System with Flexible Suspending Rope

Dynamics and Control of Dual-Quadrotors Slung a Slender Beam with Attitude-Pendulum Coupling Effects

Dynamic Modeling and Control of ARMG Spreader's Fine Tuning with Auxiliary Wire Ropes

Dynamics, stability, and control of a four-cable mount system for wind tunnel test

Dynamics Simulation of the Hoisting Cable of Single Cable Winding Hoisting Device

Dynamics and control of three-dimensional dual cranes transporting a bulky payload

Exact dynamic analysis of multi-segment cable systems

Dynamic Analysis and Control for Cable-supported Flexible Structure

Control of Bridge Cranes With Distributed-Mass Payload Dynamics

Research on dynamic modeling and control strategy of four anti-swing cable system for ship-mounted cranes

Modeling and Simulation of a Slung-load System for the Helicopter

Data-Driven Control Method Based on Koopman Operator for Suspension System of Maglev Train

Stability analysis of electromagnetic suspension systems coupled with flexible frames: Modeling, control, analysis and experimentation

Dynamic Modeling and Control of a Cable-Driven Parallel Mechanism with a Spring Spine

Dynamic Modeling of Helicopter-Slung Load System under the Flexible Sling Hypothesis

Fuzzy-Based Anti-Swing Control for Variable-Length Cable-Suspended Aerial Transportation Systems Considering the Hook Effect