Abstract:The current research of the global chassis control problem for the full drive-by-wire vehicle focuses on the control allocation (CA) of the four-wheel-distributed traction/braking/steering systems. However, the path following performance and the handling stability of the vehicle can be enhanced a step further by automatically adjusting the vehicle speed to the optimal value. The optimal solution for the combined longitudinal and lateral motion control (MC) problem is given. First, a new variable step-size spatial transformation method is proposed and utilized in the prediction model to derive the dynamics of the vehicle with respect to the road, such that the tracking errors can be explicitly obtained over the prediction horizon at varying speeds. Second, a nonlinear model predictive control (NMPC) algorithm is introduced to handle the nonlinear coupling between any two directions of the vehicular planar motion and computes the sequence of the optimal motion states for following the desired path. Third, a hierarchical control structure is proposed to separate the motion controller into a NMPC based path planner and a terminal sliding mode control (TSMC) based path follower. As revealed through off-line simulations, the hierarchical methodology brings nearly 1700% improvement in computational efficiency without loss of control performance. Finally, the control algorithm is verified through a hardware in-the-loop simulation system. Double-lane-change (DLC) test results show that by using the optimal predictive controller, the root-mean-square (RMS) values of the lateral deviations and the orientation errors can be reduced by 41% and 30%, respectively, comparing to those by the optimal preview acceleration (OPA) driver model with the non-preview speed-tracking method. Additionally, the average vehicle speed is increased by 0.26 km/h with the peak sideslip angle suppressed to 1.9°. This research proposes a novel motion controller, which provides the full drive-by-wire vehicle with better lane-keeping and collision-avoidance capabilities during autonomous driving.

Data-Driven Trajectory Tracking Control Algorithm Design for Fast Migration to Different Autonomous Vehicles

Predictive Control Method of Autonomous Vehicle Based on Tracking-error Model

Adaptive Learning-Based Path-Tracking Control for Unknown Vehicle Systems under Performance Optimization

Implementing Trajectory Tracking Control Algorithm for Autonomous Vehicles

Model predictive trajectory optimization and tracking for on-road autonomous vehicles

Event-triggered model predictive-preview control strategy for trajectory tracking of autonomous vehicle

Human-like Tracking Control Strategy for Autonomous Vehicle Based on Preview Feedforward and Active Disturbance Rejection Control

Adaptive Trajectory Tracking Control Strategy of Intelligent Vehicle

A New Trajectory Tracking Algorithm for Autonomous Vehicles Based on Model Predictive Control

Cost-Guaranteed Trajectory Tracking Control for Automated Driving System

Trajectory-guided Control Prediction for End-to-end Autonomous Driving: A Simple yet Strong Baseline

Optimal Design of MPC Autonomous Vehicle Trajectory Tracking Controller Considering Variable Time Domain

An Optimal Model-Based Trajectory Following Architecture Synthesising the Lateral Adaptive Preview Strategy and Longitudinal Velocity Planning for Highly Automated Vehicle

Integrated Design of Local Trajectory Planning and Tracking Control for Autonomous Driving

Optimal Predictive Control for Path Following of a Full Drive-by-Wire Vehicle at Varying Speeds

Improvement of a Learning-Based Tuning Approach for Trajectory Tracking Controller

A Fast Kernel-Based Optimal Control Framework for Autonomous Driving

The Design of Driverless Vehicle Trajectory Tracking Control Strategy

D-Tracking: Digital Twin Enabled Trajectory Tracking System of Autonomous Vehicles

Trajectory Tracking Control for Autonomous Driving Vehicle with Obstacle Avoidance: Modeling, Simulation, and Performance Analysis