Abstract:Metal-CO2 batteries represent a potential new technology for environmental protection, as they can effectively reduce CO2 emissions while ensuring energy production. However, the design of active, selective, and cost-efficient electrocatalysts remains a challenge. Herein, we report two tubular cathodes (CNTs@Cu and CNTs@Ni, CNTs = carbon nanotubes) that are used to assemble two primary Zn-CO2 flow batteries with zinc wire and 1-ethyl-3-methylimidazolium tetrafluoroborate as the anode and electrolyte, respectively. Interestingly, CO2 conversion with quite high selectivity could be realized over the different cathodes in these two Zn-CO2 flow batteries. These two batteries exhibit the advantages of high operating voltages, excellent stability, and continuous and selective product outputs. The flow battery based on the tubular CNTs@Cu cathode can convert CO2 into CH4 with a faradaic efficiency of up to 93.3%. Concurrently, electricity is generated at an energy density of 376 Wh kg(-1). This battery remains stable for more than 18 days. Surprisingly, the flow battery with a tubular CNTs@Ni cathode can reduce CO2 to syngas (CO and H-2, faradaic efficiencies for CO and H-2 of up to 50% and 48%, respectively) while generating electricity at an energy density of 208.7 Wh kg(-1), and it is stable for up to 9 days. These excellent performances are attributed to a synergistic effect involving CNTs and the metal substrate, and the differences between these two batteries are mainly ascribed to metal substrate effects. Excitingly, low concentrations of CO2 released by humans and simulated vehicle emissions could also be converted. This work demonstrates that Zn-CO2 flow batteries are green, selective, efficient, and promising devices for producing value-added chemicals, and they are worthy of further theoretical studies and practical application.

High-efficiency Metal-Free CO2 Mineralization Battery Using Organic Redox Catalysts

Electricity generation by a novel CO<sub>2</sub> mineralization cell based on organic proton-coupled electron transfer

Li-CO2 and Na-CO2 Batteries: Toward Greener and Sustainable Electrical Energy Storage

Developing a Low-Carbon, Scalable Strategy for the Conversion of Spent Batteries into Metal-Organic Framework-74 for CO2 Capture

Generation of Electricity from CO 2 Mineralization: Principle and Realization

One Stone Three Birds: An Aqueous Mg–CO 2 Battery for Generation of Electricity, Syngas, and High-Value Phosphate

Advanced Li/Na-CO2 Batteries Enabled by the Γ-Mno2 Catalyst with Enhanced Carbonate Decomposition

Metal–CO<sub>2</sub> Electrochemistry: From CO<sub>2</sub> Recycling to Energy Storage

Electrochemical CO2 Mineralization for Red Mud Treatment Driven by Hydrogen-Cycled Membrane Electrolysis

Integrated Energy Storage and CO2 Conversion Using an Aqueous Battery with Tamed Asymmetric Reactions

Electronic Structure Regulation of MnCo2O4 Via Surface‐Phosphorization Coupling to Monolithic Carbon for Oxygen Electrocatalysis in Zn–Air Batteries

Low-Overpotential Rechargeable Na-CO2 Batteries Enabled by an Oxygen-Vacancy-Rich Cobalt Oxide Catalyst

Metal-Co2 Electrochemistry: From Co2 Recycling To Energy Storage

Electron Accumulation Enables Bi Efficient CO2 Reduction for Formate Production to Boost Clean Zn-CO2 Batteries

High-Rate Nonaqueous Mg-CO2 Batteries Enabled by Mo2 C-Nanodot-Embedded Carbon Nanofibers.

Progress for Metal-CO<sub>2</sub> Batteries: Mechanism and Advanced Materials

Highly Selective Co2 Conversion To Methane Or Syngas Tuned By Cnts@Non-Noble-Metal Cathodes In Zn-Co2 Flow Batteries

A Nonaqueous Mg‐CO2 Battery with Low Overpotential

Enhancing Catalyzed Decomposition of Na2CO3 with Co2MnO X Nanowire-Decorated Carbon Fibers for Advanced Na-CO2 Batteries.

Metal–CO 2 Electrochemistry: From CO 2 Recycling to Energy Storage

Biomass Waste-Derived 3D Metal-Free Porous Carbon As a Bifunctional Electrocatalyst for Rechargeable Zinc–Air Batteries