Abstract:Abstract Tilt-to-length (TTL) coupling noise is one of the main noise sources that affect space gravitational wave detection, and the Tianqin project requires that the internal TTL coupling noise of the telescope used be less than 0.4 pm/Hz 1/2 within the frequency band from 0.1 mHz to 1 Hz. In order to design a telescope that meets the requirements of TTL coupling noise and carry out preliminary error allocation research, it is necessary to analyze and calculate the TTL coupling noise, and then guide the design and optimization of the telescope system. This paper establishes a computational analysis model for the non-geometric TTL coupling noise inside the telescope using the first 36-order edge Zernike polynomials. A method was proposed to reduce the internal TTL coupling noise of the telescope by reducing the proportion of sensitive aberrations caused by non-geometric TTL coupling noise. Simulation results show that, with the RMS value of wavefront aberration at the telescope exit pupil unchanged, reducing the proportion of sensitive aberrations at the telescope exit pupil can effectively reduce the internal TTL coupling noise of the telescope. By optimizing the telescope optical system to reduce the proportion of noise-sensitive aberrations, the non-geometric TTL coupling noise inside the telescope has been reduced from 0.34 pm/Hz 1/2 @ 0.1 mHz ∼ 1 Hz to 0.25 pm/Hz 1/2 . This result can provide some guidance for the design of telescope optics based on the suppression of internal TTL coupling noise in the telescope.

Study on Temperature Noise Suppression Characteristics Based on Multilayer Composite Structure

Thermal induced noise on test mass with copper alloy electrode housing for spaceborne gravitational wave detection

High-stability temperature control and frequency-domain analysis of sandwich-like insulation design based on phase change materials for satellite thermal management

A low-noise multilayer mu-metal thin shell magnetic shield for ultra-highly sensitive atomic sensors

Electromagnetic Radiation Suppression of Package Lid Based on CSRR and Interdigital Structure

Study on the Voltage Reference Noise at Sub-Millihertz Frequencies for Developing an Ultra-Stable Temperature Measurement Subsystem

Coupling of Magnetic Field Noise in Multilayer Magnetic Shields for Atomic Magnetometer

Research on the tilt-to-length Coupling Noise Suppression Method inside the Gravitational Wave Detection Telescope

Improving the Environmental Temperature Adaptability of an Electric Temperature Measurement Subsystem by Matching Temperature Coefficients of Substitutable Resistors

Research on the Common Mode Suppression Method of Temperature Noise in an NV Color Center Spin Magnetometer

On the noise effect of test mass surface roughness in spaceborne gravitational wave detectors

Suppression of extraneous thermal noise in cavity optomechanics

The impact of telescope aberrations on the magnitude of tilt to length coupling noise in space based gravitational wave detectors

Improving the Performance of Cryogenic Calorimeters with Nonlinear Multivariate Noise Cancellation Algorithms

The Influence of Temperature Disturbance on Space Inertial Sensors

Suppression of Magnetic Noise and Field in Cubic Low-Noise Ferrite Magnetic Shields

Grid composite meta-surface absorber with thermal isolation structure for terahertz detection

Three mode interaction noise in laser interferometer gravitational wave detectors

Noise characteristic analysis and separation technique of multi-channel scanning measurement system

A two-stage insulation method for suppressing thermal crosstalk in microarray sensitive units

Multi-channel Thermal Deformation Interference Measurement of the Telescope Supporting Frame in Spaceborne Gravitational Wave Detection