Volumetric Error Measurement of the Five-Axis Machine Tool Using Optimal Measurement Points Based on a Modified Genetic Algorithm

Songtao He,Seth Osei,Wei Wang,Jiahao Yu,Qicheng Ding,Lai Junjie

DOI: https://doi.org/10.1016/j.measurement.2024.115265

IF: 5.6

2024-01-01

Measurement

Abstract:Improving the volumetric accuracy enhances the performance accuracy of the five-axis machine tool which is one of the major goals in the manufacturing industry. Several methods have been proposed for volumetric error measurement through random point selection, however, errors are sensitive to axes’ measurement points to which less attention has been given in the previous works. This work proposes a new method of selecting optimal axes’ points to measure the volumetric error of the machine tool based on the observability index of the machine tool using a modified genetic algorithm. This is to investigate the applicability and effectiveness of the observability index in selecting optimal points during error measurement. From the simulation and experimental results, the root mean square errors between the set and measured PDGEs, and the predicted and measured volumetric errors for the optimal points were lower than those of the random points. However, the RMSE between the volumetric error before and after compensation for the optimal points was higher signifying high error reduction than that of the random points. In general, the optimal points obtained higher identification accuracy results than the random points. This shows that the method of using a modified genetic algorithm based on the observability index of the machine tool to select optimal axes points during volumetric error measurement enhances the identification accuracy which will enhance the performance accuracy of the five-axis machine tool.