Abstract:Titanium alloys can achieve ultrahigh strength through precipitation hardening of secondary alpha-phase (alpha s) from ,B-matrix but often compromise ductility due to the conventional strength-ductility trade-off. In this study, a new strategy based on ,B-subgrains-mediated hierarchical alpha-precipitation is devised to balance the conflict in Ti-6Al-2Mo-4Cr-2Fe (wt.%) alloy through a unique combination of hot rolling, short-term solid solution, and aging treatment, i.e., RSST + A. Tensile testing reveals that the RSST + A samples exhibit ultrahigh strength of similar to 1581 MPa and decent ductility of similar to 8.4 %, surpassing similar to 1060 MPa and similar to 2.7 % of the corresponding RSST counterparts without final aging treatment. This remarkable strengthening and counterintuitive ductilizing is attributed to the architecting of ,B-subgrains-mediated hierarchical alpha- precipitates as a result of our specific processing approach. The designed short-term solution introduces abundant ,B subgrains that are transformed from the retained intensive dislocations during hot rolling. The ,B subgrain boundaries subsequently promote a dramatic precipitation of alpha allotriomorphs (alpha GB) and Widmanst & auml;tten side-plates (alpha WGB), which effectively subdivides ,B grains into numerous tiny independent deformation units. Consequently, plastic strain is uniformly partitioned into a large number of small aged ,B subgrains during tension, which strongly impedes strain localization that would typically occur across multiple ,B subgrains in the fashion of long straight slip bands in the case of the RSST samples. Furthermore, the hierarchical alpha structure also postpones uncontrollable cracking even when structural damage occurs at the last stage of straining. These findings demonstrate that appropriately manipulating microstructure through elaborately designing processing routes enables unexpectedly ductilizing high- strength titanium alloys in the precipitation-hardening state. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Achieving Back-Stress Strengthening at High Temperature Via Heterogeneous Distribution of Nano TiBw in Titanium Alloy by Electron Beam Powder Bed Fusion

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Achieving High Strength-Ductility Synergy in TiBw/near Α-Ti Composites by Ultrafine Grains and Nanosilicides Via Low-Temperature Severe Plastic Deformation

Electron Beam Welding and Post Heat Treatment of a New Near-Beta High-Strength Ti-4Al-5Mo-5V-5Cr-1Nb Alloy

Enhancing strength-ductility synergy in nano-sized TiB 2 /Al composite via rapid solidification and thermo-mechanical processing

Powder metallurgy fabrication and heat treatment modification of (TiBw+(TiZr)5Si3)/TA15 composites

Enhancing Strength-Ductility Synergy in Metastable Β-Ti Alloys Through Β-Subgrains-mediated Hierarchical Α-Precipitation

Achieving ultra-high strength in TiB/metastable-β composites via short-process technology

Microstructure evolution, mechanical properties and high temperature deformation of (TiB + TiC)/Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe titanium alloy

Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures

High Temperature Tensile Properties, Deformation, and Fracture Behavior of a Hybrid-Reinforced Titanium Alloy Composite

Microstructural evolution and FCC twinning behavior during hot deformation of high temperature titanium alloy Ti65

Engineering fine grains, dislocations and precipitates for enhancing the strength of TiB 2 -modified CoCrFeMnNi high-entropy alloy using Laser Powder Bed Fusion

Synergistic enhancement of strength and toughness of β-Ti alloy with a fine grain: Effect of deformation temperature

Microstructure Evolution and Mechanical Properties of Ti46.5Al2Cr1.8Nb-(W, B) Alloys Fabricated by Spark Plasma Sintering and Pulse Current Assisted Isothermal Forging

Enhanced high temperature mechanical properties and heat resistance of an Al–Cu–Mg–Fe–Ni matrix composite reinforced with in-situ TiB2 particles

Heat treatment effect on the microstructure and elevated temperature tensile property of the Ti6242S alloy fabricated via laser powder bed fusion

Stability of Thermal Cycling and High Temperature Mechanical Properties for Ti–V–Al–B Lightweight Shape Memory Alloy

Towards strength-ductility enhancement of titanium matrix composites through heterogeneous grain structured Ti matrix design

Making Titanium Alloys Ultrahigh Strength and Toughness Synergy Through Deformation Kinks-Mediated Hierarchical Α-Precipitation

Multi-scale dispersion strengthening for high-temperature titanium alloys: strength preservation and softening mechanisms