Abstract:The polycrystalline IN713C produced via investment casting is one of the widely-used nickel-based superalloy in automotive and aerospace industries. This alloy, however, has an apparent inhomogeneous microstructure generated during casting and contains dendritic structure that gives rise to strain localisation during loading. Yet, the effect of dendrite structure, grain size and shape as well as crystallographic orientation, which directly influence fatigue property and deformation micromechanism in the components, is rarely studied. In the present study, IN713C cast bars are tailored with three different grain structures, i.e., transition, equiaxed and columnar, with substantial grain size variations. The produced bars were tested under strain controlled LCF (Low Cycle Fatigue) and stress controlled HCF (High Cycle Fatigue) conditions at 650 °C. The results showed that most of fatigue cracks initiated from casting porosities and fatigue life extended in the microstructure with a small grain size during both HCF and LCF loadings. It is also demonstrated that fatigue striations were mainly observed within dendrite areas during crack propagation, whereas the higher GND (Geometrically Necessary Dislocation) density were predominantly observed in the interdendrite areas. Here, we propose a concept of 'Crack Propagation Unit (CPU)' for better description of deformation mechanism at local scale during fatigue loading by combining fracture surface characteristic methodology and dislocation distribution analyses within the dendrite structural unit. Furthermore, this model to understand the deformation micromechanism can provide a new perspective on the interpretation of Hall-Petch relationship in casting materials that contain dendritic structure. This is further demonstrated via direct correlation of the high crack propagation resistance with the crack path divergence instead of the dislocation pile-up at the grain boundary or in-between the γ/ γ' channels. Moreover, by utilising serial sectioning method followed by layered EBSD scanning, quasi-3-D grain orientation mappings were obtained, and crystallographic texture information were directly correlated with the fracture surface observations. This allowed an investigation of the influence of orientation of individual grains and micro/macro texture on crack propagation rate. The critical stage of crack propagation in fatigue life and its correlations with microstructural features is established, offering potential practical applications by controlling the investment casting process parameters.

Numerical Simulation of Fatigue Fracture in Gradient High-Strength Steel: Effects of Carbides and Gradient Structure on Stress–strain Response and Crack Propagation Behavior

Microstructures-based Constitutive Analysis for Mechanical Properties of Gradient-Nanostructured 304 Stainless Steels

Constitutive modeling of mechanical behaviors in gradient nanostructured alloys with hierarchical dual-phased microstructures

Micromechanical modeling for mechanical properties of gradient-nanotwinned metals with a composite microstructure

Optimizing Fatigue Performance in Gradient Structural Steels by Manipulating the Grain Size Gradient Rate

The Influence of Combined Gradient Structure with Residual Stress on Crack-Growth Behavior in Medium Carbon Steel

Fatigue crack propagation of the gradient surface-modified layer of high-strength steel

Experimental and numerical insights into fatigue crack propagation of railway component with gradient residual stress

Retarding effect of submicron carbides on short fatigue crack propagation: Mechanistic modeling and Experimental validation

Numerical Study of Fracture Behavior of Gradient Nano-Grained Metals by Molecular Dynamics Simulations

Research on Multi-Scale Failure Mechanism of Gradient Nanostructured 316L Steel under Strain-Controlled Fatigue at 650 °C

A Dislocation Density-Based Crystal Plasticity Damage Model for Rolling Contact Fatigue of Gradient Grained Structures

Revealing the Fatigue Strengthening and Damage Mechanisms of Surface-Nanolaminated Gradient Structure

Strength Gradient Enhances Fatigue Resistance of Steels

Fatigue Crack Propagation Experiment and Numerical Simulation of 42crmo Steel

The Effects of Grain Size, Dendritic Structure and Crystallographic Orientation on Fatigue Crack Propagation in IN713C Nickel-Based Superalloy

Experimental Research on Fatigue Crack Growth Behavior of Q690D High Strength Steel

Gradient residual stress and fatigue life prediction of induction hardened carbon steel axles: Experiment and simulation

Fatigue Behaviors of High-Strength Carburized Steel under Different Stress Ratios: Evaluation of Competitive Failure and Prediction of Very Long Life

Microstructure Refinement and Grain Size Distribution in Crack Initiation Region of Very-High-cycle Fatigue Regime for High-Strength Alloys

Fatigue-resistant design in low-cycle regime by regulating the micro-structural gradient in a TWIP steel: Modelling and experiment