Abstract:Back‐to‐back converter based railway traction power supply system (TPSS) can eliminate neutral sections in the traction side and improve power quality in the grid side, but it still has some drawbacks such as low reliability, difficulty in accepting large‐capacity renewable energy, and power mismatches. In this study, a double‐layer DC/AC TPSS with renewable integration is proposed to address these challenges and to improve system performance. The proposed topology breaks the limit of back‐to‐back structure and enables more flexible free energy flow. A top‐down system design method is proposed in this study. Firstly, the characteristics of the proposed TPSS for integration with renewable power are described and compared with the traditional back‐to‐back topology. Secondly, a DC droop controller and a AC droop controller are designed for DC layer grid and AC layer grid, respectively, to control the power flow in each layer. The traditional AC droop control is based on the inductive transmission impedance, but the resistance of traction transmission line cannot be ignored. Thus, a modified droop control strategy with the consideration of line resistance is also proposed in this study. Subsequently, the voltage control strategy for the single modular multilevel converter is designed to track the reference signal from the upper droop controller. Finally, a general double‐layer DC/AC TPSS is designed from bottom to top, and the simulation results confirm that the proposed TPSS with renewable integration is capable of delivering desirable performance.

Topology and Control Design of DC/DC Converters for Urban Rail Transit PV Power Generation System

An Integrated Design of Power Converters for Electric Vehicles.

Design of a 300 Kw Partial Power Processing Based DC-DC Converter for Electric Vehicles Extreme Fast Charging Stations

Distributed Real-Time Multi-Objective Control of a Virtual Power Plant in DC Distribution Systems

Architecture of Urban Rail Transit Power Supply Based on PET Braking Energy Feedback

Fault Tolerance Enhancement of the PV Module System by Improving the Topology and Control Strategy

A Novel Architecture Of Urban Rail Transit Based On Hybrid Energy Storage Systems Using Droop Control

Decentralized DC Voltage and Power Sharing Control of the Parallel Grid Converters in Multi-Terminal DC Power Integration System

New Modelling of Photovoltaic Power Integration System and Its Control Strategy for Medium-Voltage DC Distribution Network

A Novel Urban Rail Transit System Based on DC Distribution and Energy Internet Architecture

DC Autotransformer-Based Traction Power Supply for Urban Transit Rail Potential and Stray Current Mitigation

Crossing Power Restraint under Bidirectional Traction Substation Converter in Urban Rail Transit with Multiple Reflux Paths Coupling

Urban Rail Transit Power System Integrated with Electric Vehicles Based on CLLC Resonant and Buck-boost Converter

DC Traction Power Supply System Based on Modular Multilevel Converter Suitable for Energy Feeding and De-Icing

Novel double‐layer DC/AC railway traction power supply system with renewable integration

Modeling And Simulation Of Dc Distribution Network Based On Distributed Energy

A Distributed Multimode Control Strategy for the Cascaded DC–DC Converter Applied to MVAC Grid-Tied PV System

Urban Rail Transit with V2G (Vehicle-to-grid): A Novel Integrated Architecture Based on Power Electronics Transformer

Connection and Control Strategy of PV Converter Integrated into Railway Traction Power Supply System

DC/DC Converters Design and Control for Hybrid Power System

Multi-Port and -Functional Power Conditioner and Its Control Strategy with Renewable Energy Access for a Railway Traction System